1
Hinge tab
2
Retainer
Procedure - Installing drives in the DE1600 and DE5600
drive trays
About this task
In some situations, the drive tray might be delivered without the drives installed. Follow the steps in
this procedure to install the drives.
Attention:
Risk of equipment malfunction – To avoid exceeding the functional and
environmental limits, install only drives that have been provided or approved by NetApp. Drives
might be shipped but not installed. System integrators, resellers, system administrators, or users
can install the drives.
Note:
For the DE1600 drive tray, the installation order of the drives is from top to bottom and from
left to right. For the DE5600 drive tray, the installation order is from left to right. The installation
order is important because the drives might already contain configuration information that depends
upon the correct sequence of the drives in the tray.
Steps
1. Beginning with the first drive slot (the upper-left slot of the DE1600 drive tray or the left slot of
the DE5600 drive tray), place the drive in the slot guides, and slide the drive all the way into the
slot.
2. Push the drive handle to the right (DE1600 drive tray) or down (DE5600 drive tray).
•
Installing a drive in the DE1600 drive tray
1
Drive handle
•
Installing a drive in the DE5600 drive tray
Step 6 - Installing the drive trays for the controller-drive tray configurations | 71
Summary of Contents for E2760
Page 2: ......
