Category
Category
Code
1
Detail Codes
2
Component failure
CF+
•
dx+ = Processor or cache DIMM.
•
Cx = Cache DIMM.
•
Px+ = Processor DIMM.
•
Hx+ = Host interface card.
•
Fx+ = Flash drive.
•
bl + Base Controller Card
Diagnostic failure
dE+
Lx+ = Lock-down codes (See
Things to know - Lock-
down codes
on page 129 and
Things to know - Seven-
segment display use cases
on page 131.)
Category delimiter
dash+
(Appears as
two short
dashes:
"--").
.
The separator between category-detail code pairs is used
when more than one category detail code pair exists in the
sequence.
End-of-sequence
delimiter
blank -
4
The end-of-sequence delimiter is automatically inserted
by the hardware at the end of a code sequence.
Note:
1
A two-digit code that starts a dynamic display sequence.
2
A two-digit code that follows the category code with more specific information.
3
The plus (+) sign indicates that a two-digit code appears and the Diagnostic LED is turned on.
4
No codes display, and the Diagnostic LED is off.
Things to know - Component failure identifications
Use the seven segment-display values to identify the component.
Table 35: Failure identifications
Component
Seven-Segment Display Used in this Controller
State
Code
1
Power-on
Diagnostics
Suspended
Operational
Processor DIMM (dx +
2
)
3
yes
yes
no
Cache DIMM (CX +)
yes
yes
no
Host Card (HX +)
yes
yes
yes
Flash Drive (FX +)
no
no
yes
128 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
