1
FC Channel 3 - 4-Gb Link Rate LED*
2
FC Channel 3 - 8-Gb Link Rate LED*
3
FC Host Interface Card Channel 3
4
FC Channel 4 - 4-Gb Link Rate LED*
5
FC Channel 4 - 8-Gb Link Rate LED*
6
FC Host Interface Card Channel 4
7
FC Channel 5 - 4-Gb Link Rate LED*
8
FC Channel 5 - 8-Gb Link Rate LED*
9
FC Host Interface Card Channel 5
10
FC Channel 6 - 4-Gb Link Rate LED*
11
FC Channel 6 - 8-Gb Link Rate LED*
12
FC Host Interface Card Channel 6
13
SAS Expansion Port 1 Fault LED
14
SAS Expansion Port 1 Link Up LED
15
SFF-8644 SAS Drive Expansion Port 1 and Port 2
* When both LEDs for a channel are on, the link rate is 16 Gb. The “A” and “L” labels refer to
Activity and Link, respectively, when an iSCSI HIC is used.
Drive trays
Attention:
Possible equipment damage – You must use the supported drives in the drive tray to
ensure proper operation. For information about supported drives, contact technical support.
Attention:
Risk of equipment malfunction –To avoid exceeding the functional and
environmental limits, install only drives that have been provided or approved by NetApp, Inc. Not
all controller-drive trays are shipped with pre-populated drives. System integrators, resellers,
system administrators, or users of the controller-drive tray can install the drives.
•
DE1600 drive tray – Front view
1
Left end cap (has the drive tray LEDs)
2
Drives
24 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
