NetApp AltaVault AVA400 Administration Manual Download Page 77

Page: 77 / 276

NetApp AltaVault Cloud Integrated Storage Administration Guide

Beta Draft

Configuring log settings

Configuring system administrator settings

Under Per-Process Logging, complete the configuration as described in this table.

Click

Apply

to apply your changes to the running configuration.

Control

Description

Add a New Process
Logging Filter

Displays the controls for adding a process-level logging filter.

Process

Select a process to include in the log from the drop-down list:

• alarmd - Alarm Manager.

• cli - Command Line Interface.

• hald - Hardware abstraction daemon, which handles access to the hardware.

• Isiraidd - LSI raid daemon.

• mgmtd - Device control and management, which directs the entire device management system.

It handles message passing between various management daemons, managing system

configuration and general application of system configuration on the hardware underneath
through the hardware abstraction layer daemon (HALD).

• pm - Process Manager, which handles launching of internal system daemons and keeps them

running.

• sched - Process Scheduler that handles one-time scheduled events.

• statsd - Statistics Collector that handles the statistics.

• wdt - Watchdog Timer, the motherboard watchdog daemon.

• webasd - Web Application Process, which handles the Web user interface.

Minimum Severity

Select the minimum severity level for the log messages. The log contains all messages with this

severity level or higher. Select one of the following levels from the drop-down list:

• Emergency - Emergency, the system is unusable. This is the default setting.

• Alert - Action must be taken immediately.

• Critical - Conditions that affect the functionality of the AltaVault.

• Error - Conditions that probably affect the functionality of the AltaVault.

• Warning - Conditions that could affect the functionality of the AltaVault, such authentication

failures.

• Notice - Normal but significant conditions, such as a configuration change.

• Info - Informational messages that provide general information about system operations.

Add

Adds the filter to the list, after which it logs at the selected severity and higher.

Remove Selected

Select the check box next to the name and click

Remove Selected

to remove the filter.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands

NetApp AltaVault AVA400, Administration Manual

Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands