manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 184

184

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

System components AVA-400, AVA-800

AltaVault appliance components

A rack mounting kit for standard racks (optional)

Note: 

Removing a drive out of a RAID group and moving it to a different RAID group is not supported. The disk drives have been 

formatted to a unique RAID configuration and should not be used for Hot-Swappable drive replacements.

System chassis specifications

The following table summarizes the physical specifications for the system chassis:

What you need to know about expansion shelves

You must understand the following information for a successful installation:

The system uses RAID6 controllers, twelve drives per RAID group, two RAID groups per shelf (AVA400/
AVA800).

You can hot-swap failed hard drives on an AltaVault expansion shelf, but you must run a CLI command to add it 
to the RAID array. For more information see, 

NetApp AltaVault Cloud Integrated Storage User’s Guide

.

You must add a drive to the RAID controller using the Management Console or the command-line interface. New 
expansion shelves cannot be added when system is running. Drives are not added to the RAID array 
automatically. You must shut down the system, add the drives, and restart the system.

The two power supplies on an AltaVault expansion shelf are field replaceable units (FRUs).

The power supplies have fans:

–

The PSU fans are for PSU cooling and maintaining chassis thermals.

–

The fans continue to run, even if the power supply unit (PSU) itself fails.

If the PSU fails, do not remove it from the chassis until a replacement is immediately available. 
It is recommended to replace the PSU as soon as possible to restore full redundancy.

Description 

Controller

Rack units

6 U

Height

10.2 in. (25.9 cm)

Width

Without mounting flanges: 17.6 in. (44.68 cm)

With mounting flanges: 19 in. (48.26 cm)

Depth

24.3 in. (61.72 cm)

Weight

105 lbs (47.6 kg)

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands