manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 177

NetApp AltaVault Cloud Integrated Storage Administration Guide

    177

          

CHAPTER 14

Disaster recovery

 Disaster recovery is the process of recovering the technology infrastructure critical to an organization after a natural 
or man-made disaster. AltaVault supports disaster recovery by enabling you to retrieve your data in case of a failure.

This chapter includes the following sections:

“Disaster recovery preparations” on page 177

“Disaster recovery testing” on page 178

“Disaster recovery” on page 180

Disaster recovery preparations

You can enable AltaVault at the disaster recovery site to access backups that originated from an AltaVault at the 
affected data center. Depending on the data size, you can also use AltaVault-v at the recovery site.

Note: 

You do not need a license to restore data in read-only mode in 

AltaVault

. You can download AltaVault-v for free from the 

NetApp Support site at 

https://mysupport.netapp.com

 and use it to recover your data. 

For example, consider a data center with AltaVault located at the Production Site (site A).The backup site is the DR 
(Site B), located in a different physical location (such as different city, country, or continent). If there is a disaster at 
Site A, the data still resides in the cloud. Site B contains a passive AltaVault that is not powered on.

You can also use AltaVault-v at Site B, depending on the size of the data that you need to restore. AltaVault-v can store 
data up to 32 TB. NetApp recommends that you use an appliance in the disaster recovery site (Site B) that has the same 
or greater local storage capacity as the affected AltaVault (in Site A). If the appliances at the two sites do not match, 
you can still initiate the recovery process; however, it recovers only as much data as the size of the storage on AltaVault 
at the disaster recovery site. If the recovery process attempts to bring back more data than the disaster recovery 
AltaVault can handle, then the recovery process might fail.

For details about AltaVault sizes, see the 

NetApp AltaVault Cloud Integrated Storage Installation and Service Guide 

for Physical Appliances

.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands