manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 74

74

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Configuring system administrator settings

Configuring email settings

Configuring email settings 

You can set email notification parameters for events and failures in the Configure > Email page. 

By default, email addresses are not specified for event and failure notification.

To set event and failure email notification

1.

Choose Configure > Email.

2.

Under Email Notification, complete the configuration as described in this table.   

3.

Click 

Apply

 to apply your changes to the running configuration.

Configuring log settings 

You set up local and remote logging in the Configure > Logging page.

By default, the system rotates each log file every 24-hours or if the file size reaches one Gigabyte uncompressed. You 
can change this to rotate every week or month and you can rotate the files based on file size.

The automatic rotation of system logs deletes your oldest log file, labeled as Archived log #10, pushes the current log 
to Archived log # 1, and starts a new current-day log file.

To set up logging

1.

Choose Configure > Logging.

2.

To rotate the logs immediately, under Log Actions at the bottom of the page, click 

Rotate Logs

. After the logs are 

rotated, the following message appears:

logs have been successfully rotated

Control

Description

SMTP Server

Specify the SMTP server. You must have external DNS and external access for SMTP traffic for 

this feature to function.

Make sure you provide a valid SMTP server to ensure that the users you specify receive email 
notifications for events and failures.

SMTP Port

Specify the port number for the SMTP server. 

Report Events via Email

Specify this option to report events through email. Specify a list of email addresses to receive the 
notification messages. Separate addresses by spaces, semicolons, commas, or vertical bars.

Report Failures via Email

Specify this option to report failures through email. Specify a list of email addresses to receive the 
notification messages. Separate addresses by spaces, semicolons, commas, or vertical bars.

Override Default Sender’s 

Address

Select this option to configure the SMTP protocol for outgoing server messages for errors or 

events. Specify a list of email addresses to receive the notification messages. Separate addresses by 
commas.

You can also configure the outgoing email address sent to the client recipients. The default 
outgoing address is [email protected]. If you do not specify a domain the default 

outgoing email is do-not-reply@hostname.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands