manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 209

NetApp AltaVault Cloud Integrated Storage Administration Guide

      209

        

Beta Draft

Hot-swapping controller fan modules

System maintenance AVA-400, AVA-800

Installing the chassis

Before you begin, verify that the replacement chassis you are installing is an approved part from NetApp.

To install the chassis

1.

With the help of two or three people, slide the replacement chassis into the rack or cabinet by guiding the chassis 
onto the rails or brackets.

2.

Slide the chassis all the way into the rack or cabinet.

3.

Secure the front of the chassis to the rack or cabinet, using the screws you removed in the previous procedure.

4.

Install the fan modules in the chassis as described in 

“Installing fan modules” on page 211

.

Note: 

You must install all three fan modules for a controller. If all three fan modules associated with a controller are not detected 

when the system boots, the system will crash. For details, see 

“Slot numbering and associated components” on page 188

.

5.

Install both power supplies in the chassis using the steps described in the procedure, 

“Installing power supplies on 

a controller” on page 214

.

Note: 

Do not turn on the power supplies at this time.

6.

Reinstall the controller module in the chassis as described in 

“Installing a controller in a chassis” on page 206

. 

AltaVault systems support only one controller per chassis. Install the blank panel over the second slot.

7.

Turn the power switch on both power supplies and the power source to the ON (|) position. The system will start 
booting.

8.

To ensure that the system has booted correctly, verify that the System attention LED on the chassis front and 
Controller attention LED on chassis rear are not lit after the system has finished booting.

Hot-swapping controller fan modules

Fan modules in an AltaVault system are hot-swappable field-replaceable units (FRUs). You can hot-swap the fan 
modules while the system is powered on, without disrupting the normal operation of the system.

When a fan module fails, the system logs messages in the event log file and an alarm is raised, indicating which power 
supply has failed.

Note: 

When a fan module fails, an alarm is raised. The UI shows a degraded state with the appropriate alarm information, and if 

configured, an email is sent to the administrator.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands