manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 227

NetApp AltaVault Cloud Integrated Storage Administration Guide

      227

        

Beta Draft

Replacing RAID controllers

System maintenance AVA-400, AVA-800

Replacing RAID controllers

RAID Controllers are assigned to slots 1 and 3 in the controller. The BBU cards are located in brackets that are attached 
to the existing controller shelves behind the installed cards.

For information on replacing a RAID controller, contact NetApp support. The procedure is complex and should only 
be done by field support.

Note: 

Perform a clean shutdown before replacing any RAID Controllers.

Replacing the RTC clock coin battery

You must replace a faulty real-time clock (RTC) coin battery in the controller module to ensure that your system’s 
services and applications that depend on accurate time synchronization continue to function properly.

Removing an RTC battery

Removing an RTC battery entails shutting down the system, locating the battery in the controller module, and 
removing the battery.

Before you begin

Perform a clean system shutdown using the 

reload halt

 command.

Power down the system and disconnect its power using the steps described in the procedure, 

“Shutting down the 

AltaVault controller” on page 203

.

Removing the controller from the chassis requires assistance from NetApp Support.

To remove an RTC battery

1.

Locate the RTC coin battery in the controller module using the FRU map on the CPU cover. The attention LED 
next to the battery is lit.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands