manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 216

216

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

System maintenance AVA-400, AVA-800

Adding an additional RAID group to a configured appliance

b. Pull either the top or the bottom of the cover until one end is released, then, pull off the left ear cover, as 
displayed below.

4.

Press and hold the shelf ID button until the first digit on the digital display blinks.

5.

Press the button until a number between 0 and 9 displays. This number continues to blink.

6.

Repeat steps b and c for the second digit.

7.

Press and hold the button until the second number stops blinking. 

Both numbers on the digital display should blink and the shelf fault LED illuminates within five seconds. 
The fault LED stays lit until you power-cycle the shelf.

8.

To power-cycle the disk shelf to ensure the new disk shelf ID takes effect, flip the Power Switch to the 

off

 position, 

wait several seconds, then flip it back to the 

on

 position.

9.

Replace the left ear cover.

10.

Reconnect and power on the system.

Adding an additional RAID group to a configured appliance

Note: 

Removing a drive out of a RAID group and moving it to a different RAID group is not supported. The disk drives have been 

formatted to a unique RAID configuration and should not be reused for hot-swappable drive replacements.

Refer to HW Universe for drive information.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands