manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 206

206

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

System maintenance AVA-400, AVA-800

Installing a controller in a chassis

4.

Restart the target AltaVault appliance. After swapping the disks, when you restart the target AltaVault appliance, 
the following message displays:

The secure vault fails to unlock. This is because of the serial number mismatch between the appliances. 
You cannot use the data store because you cannot access the data store encryption key in the secure vault.

5.

Connect to the target AltaVault appliance through the serial cable.

6.

Log in using the default login admin and password.

7.

At the command line, enter the following CLI commands:

    CLI> enable

    CLI> configuration terminal

    CLI> update controller config

The CLI command, 

update controller config

, does the following:

Updates the add-on RAID groups with the new controller configuration.

Clears the secure vault. It is safe to run this CLI command because the information in the secure vault is 
already backed up.

Restarts the system.

8.

After AltaVault appliance starts, import the previously-saved configuration into the target AltaVault appliance 
using the Import Configuration Wizard.

9.

Reset the Megastore GUID by entering the following CLI commands at the command line:

CLI> enable

CLI> configuration terminal

CLI> megastore guid reset

The last command generates a new megastore GUID based on the serial number of the target AltaVault appliance. 
It is important to perform this step before restarting the storage optimization service.

Installing a controller in a chassis

After internal FRU replacement or movement tasks are complete, reinstall the controller module in the system chassis.

Before you begin

Ensure that the chassis enclosure is securely installed in the rack or cabinet.

Ensure the three fan modules associated with the controller module are installed in the system using the steps 
described in the procedure, 

“Installing fan modules” on page 211

.

To ensure that the system has rebooted correctly, verify that the System attention LED on the chassis front 
and the Controller attention LED on the chassis rear are not lit after the system has finished rebooting.

To install a Controller in a Chassis

1.

Align the controller module with the opening in the chassis and then gently push the controller module halfway 
into the system.

2.

Re-cable the system:

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands