manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 239

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   239

        

SNMP traps

AltaVault appliance MIB

confModeEnter 
(1.3.6.1.4.1.17163.1.102.4.0.15)

A user has entered 
configuration mode.

A user on the system has entered a 
configuration mode from either the CLI or 

the Management Console. A login to the 
Management Console by user admin sends 
this trap as well. This message is for 

notification purposes only; no other action 
is necessary.

confModeExit 
(1.3.6.1.4.1.17163.1.102.4.0.16)

A user has exited 
configuration mode. 

A user on the system has exited 
configuration mode from either the CLI or 

the Management Console. A logout of the 
Management Console by user admin sends 
this trap as well. This message is for 
notification purposes only; no other action 

is necessary.

secureVaultLocked
(1.3.6.1.4.1.17163.1.102.4.0.17)

Needs 
Attention

The secure vault is 
locked. The secure data 
cannot be used.

The secure vault is locked. The datastore 
cannot be encrypted. Check the Alarm 
Status page for more details. The alarm 

clears when the secure vault is unlocked.

dirtyCloud
(1.3.6.1.4.1.17163.1.102.4.0.19)

The cloud bucket is not 
empty even though the 
local datastore is.

There is data in the cloud although the 
AltaVault datastore is empty. Enable 
replication and recovery to ensure that the 

cloud storage is synchronized with the 
datastore.

license
(1.3.6.1.4.1.17163.1.102.4.0.21)

 

The WWBASE license is 
missing, expired, or 

invalid.

A license on AltaVault has been removed, 
has expired, or is invalid. The alarm clears 

when a valid license is added or updated.

lowSpace
(1.3.6.1.4.1.17163.1.102.4.0.22)

The backup service is 
running out of space.

The AltaVault storage optimization service 
is running out of space. Delete extra files 
and ensure that there is more space.

overCapacity

(1.3.6.1.4.1.17163.1.102.4.0.24)

The cloud bucket has 

reached its licensed 
capacity.

AltaVault capacity license manages the 

capacity of the storage within the cloud 
that the system can address. The cloud 
storage has reached the licensed capacity 

limit. You must increase your capacity 
license or decrease your data storage.

replicationError
(1.3.6.1.4.1.17163.1.102.4.0.25)

Replication encountered a 
non-fatal error.

There was an error in the replication 
process. The system automatically retries 

the replication process. Contact your cloud 
service provider or NetApp Support.

replicationPause
(1.3.6.1.4.1.17163.1.102.4.0.26)

Replication was paused.

Replication was paused because you 
scheduled it to pause at the current time.

serviceError

(1.3.6.1.4.1.17163.1.102.4.0.27)

Degraded

The backup service could 

not initialize properly.

The storage optimization service has 

encountered a condition that might degrade 
its performance. See the system log for 
more information. No other action is 

necessary.

portalUnreachable
(1.3.6.1.4.1.17163.1.102.4.0.28)

The NetApp Cloud Portal 
is unreachable.

The AltaVault cannot access the NetApp 
Cloud Portal.

Trap and OID

AltaVault 

Appliance 

State

Text

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands