NetApp AltaVault AVA400 Administration Manual Download Page 244

Page: 244 / 276

244

NetApp AltaVault Cloud Integrated Storage Administration Guide

AltaVault appliance MIB

SNMP traps

dataEvictionClear
(1.3.6.1.4.1.17163.1.102.4.0.10031)

The appliance is no
longer evicting data.

The datastore eviction issue is now
corrected.

blockstoreFullClear

(1.3.6.1.4.1.17163.1.102.4.0.10033)

The System reserved

space is now enough.

The amount of reserved space on the

AltaVault is now sufficient for the storage
optimization service to run efficiently.

shelfErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10034)

All shelves are working
properly.

There was an error in one of the expansion
shelves attached to the AltaVault, but this

is now corrected.

lowMemoryClear

((1.3.6.1.4.1.17163.1.102.4.0.10035)

The system has enough

memory.

The amount of memory available to the

AltaVault is now sufficient.

hwraidDiskIndivClear

(1.3.6.1.4.1.17163.1.102.4.0.10037)

All disks are functioning
properly.

All the disks are functioning properly.

shelfPowerSupplyClear

(1.3.6.1.4.1.17163.1.102.4.0.10038)

All shelves have proper
power supply.

All the shelves have proper power supply.

hwraidBbuErrorClear

(1.3.6.1.4.1.17163.1.102.4.0.10039)

The storage optimization
service is no longer
disabled.

The storage optimization service is no
longer disabled.

bbuIndivClear

(1.3.6.1.4.1.17163.1.102.4.0.10040)

All battery backup units

are functioning properly.

All the battery backup units are

functioning properly.

hwraidIntegrityCheckClear

(1.3.6.1.4.1.17163.1.102.4.0.10041)

RAID integrity check

alarm cleared.

The RAID integrity check alarm cleared.

evalModeExpiryClear

(1.3.6.1.4.1.17163.1.102.4.0.10042)

The virtual appliance is

no longer running in
evaluation mode.

The virtual appliance is no longer running

in evaluation mode.

metadataSpaceFullClear

(1.3.6.1.4.1.17163.1.102.4.0.10043)

The metadata reserved
space is now enough.

The metadata reserved space is sufficient.

inodesThresholdReachedClear

(1.3.6.1.4.1.17163.1.102.4.0.10044)

The number of inodes is
now below the maximum

limit.

The number of inodes is now below the
maximum limit.

dataIntegrityErrorClear

(1.3.6.1.4.1.17163.1.102.4.0.10045)

The data integrity check
alarm cleared.

The data integrity check alarm has cleared.

replicationInconsistentClear

(1.3.6.1.4.1.17163.1.102.4.0.10046)

The replication is no
longer experiencing
retries now.

The replication is no longer experiencing
retries.

inconsistentCloudDataClear

(1.3.6.1.4.1.17163.1.102.4.0.10047)

Restored cloud data

consistency.

The cloud data consistency has been

restored.

softwareUpdateAvailableClear

(1.3.6.1.4.1.17163.1.102.4.0.10048)

Software update available

alarm cleared.

The software update alarm has been

cleared.

firmwareUpgradeClear

(1.3.6.1.4.1.17163.1.102.4.0.10049)

Firmware upgrade alarm

cleared.

The firmware upgrade alarm is cleared.

Trap and OID

AltaVault

Appliance

State

Text

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands

NetApp AltaVault AVA400, Administration Manual

Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands