manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 24

24

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Using the AltaVault configuration wizards

Using the Wizard Dashboard

Configuring Amazon Glacier storage

1.

Select yes or no to use keys from KMIP server from the drop-down list. When configuring the KMIP server, you 
must:

–

Use the same username and password as created in KMS. 

–

Upload the same certificate as downloaded from KMS after signing it.

–

Add a symmetric key (KMIP key) as the encryption key. 

–

Add a secret data key (KMIP key) for each of the authentication fields. 

2.

Specify the Region. You can choose to store your data in the Amazon Glacier Region that meets your regulatory, 
throughput, and geographic redundancy criteria. 

When specifying US East (N. Virginia) or us-east-1 as the region, use US Standard.

3.

Custom Region - Optionally, specify the custom region for your cloud service provider account. 

4.

Authentication Method - Specify one of the following:

Standard - Specify selections for the 

“Standard authentication” on page 24

.

STS - Specify selections for the

 

“STS authentication” on page 25

.

Note: 

If user files are not cached on AltaVault, they should be pre-populated before reads are performed. This is because restores 

from Amazon Glacier have a latency of up to 12 hours depending on the retrieval option. For more information, see AWS 
documentation.

Standard authentication

Note: 

When S3 or Glacier is configured and Storage Optimization Service fails to start, the logs may contain the error 

“BucketAlreadyExists: The requested bucket name is not available. The bucket namespace is shared by all users of the system. 
Please select a different name and try again.” This indicates that the chosen bucket name is not available. You can resolve this by 

selecting a different bucket name. This error may also be encountered after a cloud migration or changing of the cloud settings. One 
possible reason may be that the cloud credentials do not belong to the account that owns the bucket. Double-check the credentials 
and ensure that the correct credentials are entered on the Cloud Settings page. 

For the Standard authentication type, make selections for the following: 

1.

Access Key - Specify the access key for your Amazon S3 (AWS) account.

2.

Secret Key - Specify the secret key for your cloud service provider account.

3.

Hostname - Verify the hostname of the cloud provider on which AltaVault stores the replicated data. 

4.

Bucket Name - Specify the bucket name associated with your cloud service provider account. If the bucket name 
does not exist, the bucket is created during initial 

AltaVault

 replication. Bucket names must be a series of one or 

more labels separated by a period

5.

Port - Specify the port through which replication occurs. Ports 80 or 443 are available.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands