manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 238

238

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

AltaVault appliance MIB

SNMP traps

linkError
(1.3.6.1.4.1.17163.1.102.4.0.6)

Degraded

An interface on the 
appliance has lost its link.

The system has lost one of its Ethernet 
links due to a network event. Check the 

physical connectivity between the 
AltaVault and its neighbor device. 
Investigate this alarm as soon as possible. 

Depending on what link is down, the 
system might no longer be optimizing and 
a network outage could occur.

This is often caused by surrounding 

devices, like routers or switches 
transitioning their interfaces. This alarm 
also accompanies service or system restarts 
on the AltaVault.

powerSupplyError

(1.3.6.1.4.1.17163.1.102.4.0.7)

Degraded

A power supply on the 

appliance has failed (not 
supported on all models).

A redundant power supply on the 

appliance has failed and needs to be 
replaced. Contact NetApp Support for an 
RMA replacement soon.

fanError

(1.3.6.1.4.1.17163.1.102.4.0.8)

Degraded

A fan has failed on this 

appliance (not supported 
on all models).

A fan is failing or has failed and needs to 

be replaced. Contact NetApp Support for 
an RMA replacement soon.

memoryError
(1.3.6.1.4.1.17163.1.102.4.0.9)

Degraded

A memory error has been 
detected on the appliance 

(not supported on all 
models).

A memory error has been detected. A 
system memory stick might be failing. Try 

reseating the memory first. If the problem 
persists, contact NetApp Support for an 
RMA replacement soon.

ipmi

(1.3.6.1.4.1.17163.1.102.4.0.10)

Degraded

An IPMI event has been 

detected on the appliance. 
Check the details in the 
alarm report on the Web 

UI (not supported on all 
models).

An Intelligent Platform Management 

Interface (IPMI) event has been detected. 
Check the Alarm Status page for more 
detail. You can also view the IPMI events 

on the AltaVault by entering the CLI 
command:

show hardware error-log all

localFSFull
(1.3.6.1.4.1.17163.1.102.4.0.11)

The appliance local file 
system is full.

The AltaVault local file system is full. 
Check the Eviction report and contact 
NetApp Support.

temperatureCritical

(1.3.6.1.4.1.17163.1.102.4.0.12)

Critical

The system temperature 

has reached a critical 
stage.

This trap/alarm triggers a critical state on 

the appliance. This alarm occurs when the 
appliance temperature reaches 90 degrees 
Celsius. The temperature value is not user 

configurable. Reduce the appliance 
temperature.

temperatureWarning
(1.3.6.1.4.1.17163.1.102.4.0.13)

Degraded

The system temperature 
has exceeded the 

threshold.

The appliance temperature is a 
configurable notification. By default, this 

notification is set to trigger when the 
appliance reached 70 degrees Celsius. 
Raise the alarm trigger temperature if it is 

normal for the AltaVault to get that hot, or 
reduce the temperature of the AltaVault.

scheduledJobError 
(1.3.6.1.4.1.17163.1.102.4.0.14)

A scheduled job has 
failed during execution.

A scheduled job on the system (for 
example, a software upgrade) has failed. 

To determine which job failed, use the CLI 
or the Management Console.

Trap and OID

AltaVault 

Appliance 

State

Text

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands