manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 153

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   153

        

Beta Draft

Viewing the appliance monitoring report

Viewing reports and logs

The Appliance Monitoring report includes the following statistics.

The Appliance Monitoring report provides the following statistics for each monitored appliance: hostname, appliance 
health, service state, expanded data, deduplicated data, deduplication factor, cloud storage used, cloud storage 
available, AltaVault storage available, and bytes pending replication.

It also displays a summary of the total expanded data, total deduplicated data, average deduplication factor, total cloud 
storage used, total cloud storage available, total AltaVault storage available, total bytes pending replication to the cloud 
for all monitored appliances in the network.

To configure appliance monitoring

1.

Choose Reports > Appliance Monitoring.

Field

Description

Hostname

Hostname of the monitored appliance.

Appliance Health

Current state of the appliance, which is one of the following options:

• Healthy - The AltaVault is active and optimizing storage effectively. 

You do not need to take any action.

• Needs Attention - Accompanies a healthy state to indicate management-

related issues that does not affect the ability of the AltaVault to optimize 
storage. Address the management-related issue in a low-priority order.

• Degraded - The appliance is optimizing storage but the system has 

detected an issue. Address the issue that the system has detected.

• Admission Control - The appliance is optimizing storage but has 

entered the admission control state. Admission control limits the 
number of connections made to the AltaVault, so that you do not over-
consume resources on your system. To clear this state, reduce the 

number of connections to the AltaVault.

• Critical - The AltaVault might or might not be optimizing storage. You 

must address a critical issue immediately.

Service State

Current state of the Storage Optimization Service.

Expanded Data

Data that is backed up locally by the AltaVault.

Deduplicated Data

Data that has been deduplicated. Deduplication is a method of reducing 
storage space by eliminating redundant data. It stores only one unique 

instance of the data. It replaces redundant data with a pointer to the unique 
data copy. 

Deduplication Factor

The average deduplication factor, which is the ratio of the expanded data 
and total optimized data. The total optimized data includes both 

deduplication and compression savings.

Cloud Storage Used

The amount of cloud storage used by the appliance.

Cloud Storage Available

The amount of storage available in the cloud.

AltaVault

 Storage Available

The amount of storage available on the monitored AltaVault.

Bytes Pending Replication

The number of bytes in the local disk that are pending replication to the 
cloud.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands