NetApp AltaVault AVA400, Administration Manual

Page: 26 / 276

26
NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Using the AltaVault configuration wizards Using the Wizard Dashboard
10. Enable Archiving - Enable this option if you are using the
AltaVault
for cold storage mode. For more information
about cold storage mode, see “Deployment guidelines” on page 13 .
11. Enable Cloud Deduplication - Enabling this option may improve deduplication rates for repetitive backup datasets,
lowering cloud storage costs. Disabling this option is recommended for Amazon Glacier to improve recovery of
recently written data from cache, but can decrease deduplication rates and increase cloud storage costs.
12. Enable Cloud CA Certificate - Optionally, specify a cloud CA certificate that will be used to validate the server
certificate of cloud provider. This must be .pem extension file.
13. Select the Enable Proxy check box to enable proxy server settings and specify:

Hostname/IP address - Specify the hostname or the IP address

Ports - Specify the port numbers for access

Username - Specify the name of the user for access

Password - Specify the user’s password
Configuring Amazon S3 storage
1. Select yes or no to use keys from KMIP server from the drop-down list. When configuring the KMIP server, you
must:
– Use the same username and password as created in KMS.
– Upload the same certificate as downloaded from KMS after signing it.
– Add a symmetric key (KMIP key) as the encryption key.
– Add a secret data key (KMIP key) for each of the authentication fields.
2. Specify the Region.You can choose an Amazon S3 region to optimize for latency, minimize costs, or address
regulatory requirements.
3. Custom Region - Optionally, specify the custom region for your cloud service provider account.
4. Storage Class - Specify a storage class from the drop-down list:

Standard (Standard storage class)

Standard-IA (Standard Infrequent Access)

RRS (Reduced Redundancy Service)
5. Authentication Type - Specify one of the following:

Standard - Specify selections for the “Standard authentication” on page 24 .

STS - Specify selections for the “STS authentication” on page 25 .
Configuring Atmos-based storage
1. Select yes or no to use keys from KMIP server from the drop-down list. When configuring the KMIP server, you
must:
– Use the same username and password as created in KMS.
– Upload the same certificate as downloaded from KMS after signing it.