NetApp AltaVault AVA400 Administration Manual Download Page 54

Page: 54 / 276

NetApp AltaVault Cloud Integrated Storage Administation Guide

Beta Draft

Modifying networking settings

Modifying data interfaces

Click

Apply

to apply your changes to the running configuration.

To modify main IPv4 routing table

Choose Configure > Management Interfaces.

Under Main IPv4 Routing Table, complete the configuration as described in following table.

Click

Apply

You can verify whether changes have had the desired effect by reviewing related reports.

Modifying data interfaces

You can view and modify settings for the data interfaces in the Configure > Data Interfaces page.

To display and modify the configuration for data interfaces

Choose Configure > Data Interfaces.

Specify IPv4 Address Manually

Specify this option to set a static IP address.

• IPv4 Address

Specify an IPv4 address.

• IPv4 Subnet Mask

Specify an IPv4 subnet mask.

• Default IPv4 Gateway

Specify the default primary gateway IPv4 address. The

primary gateway must be in the same network as the primary interface.

MTU

Specify the Maximum Transmission Unit (MTU) value. The default value is 1500.

Control

Description

Add a New Route

Displays the controls for adding a new route.

Destination IPv4 Address

Specify the destination IPv4 address for the appliance.

IPv4 Subnet Mask

Specify the IPv4 subnet mask.

Gateway IPv4 Address

Specify the IPv4 address for the gateway.

Interface

Select the interface from the drop-down list.

Add

Adds the route to the table list.

Remove Selected

Select the check box next to the name and click

Remove Selected

Control

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands

NetApp AltaVault AVA400, Administration Manual

Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands