manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 196

196

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

System components AVA-400, AVA-800

Internal FRUs

The following table describes the ports in use and the status of port LEDs:

Internal FRUs

The AltaVault controller has many internal FRUs. These FRUs are not hot-swappable and require the system to be 
powered off before replacing any of these components.

The controller has a FRU map printed on the CPU cover. This FRU map lists all the internal FRUs in the controller 
and their general location on the board and their corresponding LEDs.

Port label

Port description

LED labels

LED status

 Description

e0i through e01 

and 

GbE ports

Each controller has four 1Gb 

Ethernet (GbE) ports, identified 
with labels e0i, e0j, e0k, and e0l.

LNK 

(Left LED)

Activity
(Right LED)

Green

Off

Amber flashing

Off

A link is established 

between the port and 
some upstream 
device.

No link is 
established.

Traffic is flowing 
over the connection.

No traffic is flowing 

over the connection.

and

Remote management

The remote management port is 
labeled with a wrench symbol. It is 
identified as (primary) e0M in the 

CLI commands and output. This 
port is used for managing the 
AltaVault system.

LNK 
(Left LED)

Activity
(Right LED)

Green

Off

Amber flashing

Off

A link is established 
between the port and 
some upstream 

device.

No link is 
established.

Traffic is flowing 
over the connection.

No traffic is flowing 
over the connection.

 

Serial console port

The RJ-45 console port enables you 

to communicate with the controller 
directly even when a network 
connection is not available or when 

you set up the system for the first 
time by using the CLI.

No LED on this 
port.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands