NetApp AltaVault AVA400 Administration Manual Download Page 243

Page: 243 / 276

NetApp AltaVault Cloud Integrated Storage Administration Guide

243

SNMP traps

AltaVault appliance MIB

memoryErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10009)

A memory error has been
rectified on the appliance.

There was an alarm due to a memory error
on the appliance, but this is now cleared

because the memory error has been
corrected.

ipmiClear
(1.3.6.1.4.1.17163.1.102.4.0.10010)

An IPMI event has been
rectified on the appliance.

An Intelligent Platform Management
Interface (IPMI) event was detected, but it

is now corrected.

localFSFullClear
(1.3.6.1.4.1.17163.1.102.4.0.10011)

The appliance local file
system usage is below
threshold.

The appliance local file system usage
exceeded the permitted threshold, but the
usage is now below the threshold.

temperatureNonCritical
(1.3.6.1.4.1.17163.1.102.4.0.10012)

The system temperature is
no longer in a critical

stage.

The alarm that occurred when the
appliance temperature reached 90 degrees

Celsius is now cleared.

temperatureNormal
(1.3.6.1.4.1.17163.1.102.4.0.10013)

The system temperature is
back within the threshold.

The temperature of the appliance exceeded
the threshold (default value of 70 degrees
Celsius), but is now back within the

threshold.

secureValutUnlocked
(1.3.6.1.4.1.17163.1.102.4.0.10017)

Secure vault is unlocked.
The secure data store can
be used now.

The secure vault, which was locked, is now
unlocked and you can use the secure
datastore.

dirtyCloudClear

(1.3.6.1.4.1.17163.1.102.4.0.10019)

The cloud consistency

issue has been resolved.

Both the cloud bucket and the datastore are

synchronized.

licenseClear
(1.3.6.1.4.1.17163.1.102.4.0.10021)

The appliance is now
properly licensed.

A license on the AltaVault was removed,
had expired, or was invalid, but, the license
has been installed correctly again.

lowSpaceClear

(1.3.6.1.4.1.17163.1.102.4.0.10022)

The appliance now has

enough space for
datastore.

The appliance did not have enough space

for datastore earlier. Now, it has enough
space and the alarm is cleared.

overCapacityClear
(1.3.6.1.4.1.17163.1.102.4.0.10024)

The cloud bucket is no
longer over its licensed

capacity.

The cloud storage meets the storage limit
allocated by its capacity license.

replicationErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10025)

Replication error has been
cleared.

There was an error in the replication
process, but this is now cleared.

replicationPauseClear
(1.3.6.1.4.1.17163.1.102.4.0.10026)

Replication was resumed.

Replication had paused, but it has resumed.

serviceErrorClear

(1.3.6.1.4.1.17163.1.102.4.0.10027)

The backup service

initialized properly.

There was an error in the storage

optimization service, but this is now
corrected.

portalUnreachableClear
(1.3.6.1.4.1.17163.1.102.4.0.10028)

The NetApp Cloud Portal
is now reachable.

The AltaVault could not access the NetApp
Cloud Portal, but this is now corrected.

rplctdBytesPendingClear

(1.3.6.1.4.1.17163.1.102.4.0.10029)

Number of bytes pending

replication is within
normal range now.

The number of bytes pending replication

had exceeded the bytes pending alert limit,
but this is now corrected.

cloudDispErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10030)

The appliance is now
connecting to its own

cloud bucket.

The cloud bucket that the AltaVault was
connecting to was in use by another

AltaVault. This issue is now corrected and
the AltaVault is connected to its own cloud
bucket.

Trap and OID

AltaVault

Appliance

State

Text

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands

NetApp AltaVault AVA400, Administration Manual

Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands