manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 65

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   65

        

Beta Draft

Configuring date and time

Configuring system administrator settings

3.

Click 

Apply

 to apply your changes to the running configuration.

Configuring date and time

You set the system date and time in the Configure > Date and Time page. 

You can either set the system date and time by entering it manually, or by assigning an NTP server to the AltaVault. 
By default, the appliance uses the NetApp-provided NTP server.

To set the date and time manually

1.

Choose Configure > Date and Time.

2.

Complete the configuration as described in this table.

   

3.

Click 

Apply

 to apply your changes to the running configuration.

To use Network Time Protocol (NTP) time synchronization

1.

Choose Configure > Date and Time.

2.

Under Date and Time, select Use NTP Time Synchronization. 

3.

As a best practice, configure your own internal NTP servers.

Temperature

• Critical Temperature - Enables an alarm and sends an email notification if the CPU temperature 

exceeds the rising threshold. When the CPU returns to the reset threshold, the critical alarm is 

cleared. The default value for the rising threshold temperature is 80º C; the default reset 
threshold temperature is 67º C.

• Warning Temperature - Enables an alarm and sends an email notification if the CPU 

temperature approaches the rising threshold. When the CPU returns to the reset threshold, the 

warning alarm is cleared. 

• Rising Threshold - Specifies the rising threshold. The alarm activates when the temperature 

exceeds the rising threshold. The default value is 80º C. 

• Reset Threshold - Specifies the reset threshold. The alarm clears when the temperature falls 

below the reset threshold. The default is 67º C

.

After the alarm triggers, it cannot trigger again until after the temperature falls below the reset 
threshold and then exceeds the rising threshold again.

Upgrade Status

Indicates the status of the upgrade. By default, this alarm is enabled. 

Control

Description

Time Zone

Select a time zone from the drop-down list. 

If you change the time zone, log messages retain the previous time zone until you reboot 
the AltaVault.

Set Time Manually

Change Date - Specify the date in this format: YYYY/MM/DD.

Change Time - Specify military time in this format: HH:MM:SS.

Alarm

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands