NetApp AltaVault AVA400 Administration Manual Download Page 242

Page: 242 / 276

242

NetApp AltaVault Cloud Integrated Storage Administration Guide

AltaVault appliance MIB

SNMP traps

dataIntegrityError

(1.3.6.1.4.1.17163.1.102.4.0.46)

Data integrity check has
reported an inconsistency.

The data integrity check has reported an
inconsistency.

replicationInconsistent

(1.3.6.1.4.1.17163.1.102.4.0.47)

Replication is
experiencing high number

of retries.

The replication is experiencing high
number of retries.

inconsistentCloudData

(1.3.6.1.4.1.17163.1.102.4.0.48)

Possible cloud data
corruption or
inconsistency.

A possible cloud data corruption or
inconsistency has been detected.

softwareUpdateAvailable

(1.3.6.1.4.1.17163.1.102.4.0.49)

Software updated
available.

A software update is available.

firmwareUpgrade

(1.3.6.1.4.1.17163.1.102.4.0.50)

Firmware upgrade
available.

A firmware upgrade is available.

controllerPowerSupplyError

(1.3.6.1.4.1.17163.1.102.4.0.51)

A power supply on the
controller has failed.

A power supply on the controller has
failed.

controllerFanError

(1.3.6.1.4.1.17163.1.102.4.0.52)

A fan has failed on the
controller.

A fan has failed on the controller.

cpuUtilClear
(1.3.6.1.4.1.17163.1.102.4.0.10004)

The average CPU
utilization has fallen back

within the acceptable
threshold.

Average CPU utilization exceeded an
acceptable threshold, but has now fallen

back to an acceptable threshold. If CPU
utilization spikes are frequent, it might be
because the system is undersized.

Sustained CPU load can be symptomatic of
more serious issues. Consult the CPU
Utilization report to gauge how long the

system has been loaded and also monitor
the amount of traffic currently going
through the appliance. A one-time spike in

CPU is normal but NetApp recommends
reporting extended high CPU utilization to
NetApp Support. No other action is

necessary because the alarm clears
automatically.

pagingActivityClear
(1.3.6.1.4.1.17163.1.102.4.0.10005)

Degraded

The system has stopped
paging excessively

(thrashing).

The system that was running low on
memory and was swapping memory pages

to disk has stopped paging excessively, and
the alarm clears.

linkErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10006)

An interface on the
appliance has regained its

link.

The system has regained the Ethernet link
it lost due to a network event and clears the

alarm.

powerSupplyErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10007)

All power supplies are
now functioning
normally.

A redundant power supply had failed on
the appliance, but this is now corrected and
all power supplies are functioning

properly.

fanErrorClear
(1.3.6.1.4.1.17163.1.102.4.0.10008)

All system fans are now
functioning normally.

A fan on the appliance had failed, but now
all fans are functioning normally.

Trap and OID

AltaVault

Appliance

State

Text

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands

NetApp AltaVault AVA400, Administration Manual

Search results

Summary of Contents for AltaVault AVA400

Reviews:

Brands by name

Popular brands