manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 134

134

NetApp AltaVault Cloud Integrated Storage Administration Guide

            

Beta Draft

Viewing reports and logs

Viewing the alarm status report

Disk Full

Enables an alarm if the system partitions (not the AltaVault data store) are full or 
almost full. For example, AltaVault monitors the available space on the directory 

that contains logs, statistics, system dumps, and TCP dumps. 

Generates an AutoSupport message when AutoSupport is enabled.

By default, this alarm is enabled.

This alarm monitors the following system partitions:

• Directory "/boot" free space

• Directory "/bootmgr" free space

• Directory "/config" free space

• Directory “/tmpFull”

• Directory “/var Full”

Hardware

Fan Error - Indicates that the system has detected a problem with the fans. Fans for 

many systems can be replaced. Contact NetApp Support at 
https://mysupport.netapp.com and file a trouble ticket to order a replacement fan.

IPMI - Indicates that there has been a physical security intrusion, triggering an 
Intelligent Platform Management Interface (IPMI) error. The following events 

trigger the IPMI alarm:

•  Chassis intrusion (physical opening and closing of the appliance case)

•  Memory errors (ECC memory errors that can or cannot be corrected)

•  Hard drive faults or predictive failures

•  Power supply status or predictive failures

The option to reset the alarm appears only after the service triggers the IPMI alarm. 
To reset the alarm, click 

Clear the IPMI alarm now

.

Inconsistent Cloud Connectivity

Indicates that the connection to the cloud provider is inconsistent, leading to a large 
number of connection errors.

Inconsistent Cloud Data

Indicates that an inconsistency in the data stored in the cloud was detected.

Licensing

Indicates that your appliance does not have a valid license.

• Evaluation Mode Expire - Evaluation mode license expired. 

• License Expired - A license expired. 

• License Expiring - A license will expire.

• License Missing - A license is missing.

Link Duplex

Indicates that an interface is not configured for half-duplex negotiation but has 

negotiated half-duplex mode. Half-duplex significantly limits the optimization 
service results.

The alarm displays which interface is triggering the duplex error. 

Choose Configure > Data Interfaces and examine the AltaVault link configuration. 
Next, examine the peer switch user interface to check its link configuration. If the 

configuration on one side is different from the other, traffic is sent at different rates 
on each side, causing many collisions. 

To troubleshoot, change both interfaces to automatic duplex negotiation. If the 
interfaces do not support automatic duplex, configure both ends for full duplex. 

You can enable or disable the alarm for a specific interface. To disable an alarm, 

choose Configure > Alarms and select or clear the check box next to the link alarm.

Alarm

Description

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands