manualshive.com logo in svg

NetApp AltaVault AVA400, Administration Manual

Share
Download
NetApp AltaVault AVA400 Administration Manual Download Page 117

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   117

        

Upgrading your software

Managing the AltaVault appliance

No license found

Managing licenses using the Management Console

You can add or remove a license using the Management Console.

1.

Choose Maintenance > Licenses.

2.

Select 

Add a New License

.

3.

Enter or paste the license into the text box, and click 

Add

. 

4.

To remove a license, check the license you want to remove and click 

Remove Selected

.

License limits

The AltaVault license limit controls the amount of data you can back up to the cloud from the AltaVault. The license 
limit varies for each AltaVault model. For details, see the 

NetApp AltaVault Cloud Integrated Storage Installation and 

Service Guide

 

for Virtual Appliances. 

The AltaVault lets you exceed the license limit by 10 percent before triggering the over_capacity alarm. When you 
exceed 110 percent of the limit, the AltaVault pauses all replication activity and does not upload any additional data to 
the cloud until you increase the licensed capacity or reclaim the space by deleting files.

Restore operations are not affected by the over_capacity alarm and all files, whether stored locally or in the cloud. Any 
new files written to the AltaVault are queued pending replication to the cloud during the over_capacity alarm.

You can find the pending data to be replicated in the Replication Optimization report by choosing Reports > 
Replication.

Model upgrades on the virtual AltaVault appliances

Upgrading an existing licensed AltaVault virtual appliance to a higher model requires removing the old license key 
and installing a new license key. Only one license key can be present on the appliance at any time. 

Refer to the sections 

“Managing licenses using the command-line” on page 116

 and 

“Managing licenses using the 

Management Console” on page 117

 on applying the new license.

After the new license is applied, halt the AltaVault virtual appliance (using the Maintenance > Reboot/Shutdown page) 
and provision additional CPU, memory, and disk as required by the model corresponding to the new license. Refer to 
the 

NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Virtual Appliances

 for details on 

model requirements.

Upgrading your software

You can upgrade your AltaVault software in the Maintenance > Software Upgrade page. The bottom of the page 
displays the AltaVault software version history, which includes the version number and the software installation date.

Review the following installation notes before proceeding with the upgrade:

Refer to the release notes for release specific upgrade information prior to upgrading software.

Quiesce all backup applications prior to upgrading AltaVault software.

Summary of Contents for AltaVault AVA400





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands