NCS Cirrus LT User Manual Download Page 7

Page: 7 / 157

Cirrus LT User Manual v2.3

Battery Safety and Tips

There is a risk of explosion if the battery is replaced with an incorrect

battery. Dispose of used battery according to the instructions.

•

Do not disassemble, heat, or incinerate.

•

Do not dispose of battery in a fire. It may explode. Check with local authorities for
disposal instructions.

•

Keep away from children.

•

Store unused battery in a normal room temperature range.

•

To optimize battery life, make sure to let the battery drain before plugging it in to
charge.

•

Leaving the notebook constantly plugged in will result in a deteriorating battery

life.

•

This product is intended to be supplied by a Listed Information Technology Equip-
ment AC adapter rated 19 VDC, 3.42A.

Summary of Contents for Cirrus LT






























































































































































Search results

Summary of Contents for Cirrus LT

Reviews:

Related manuals for Cirrus LT

Brands by name

Popular brands

NCS Cirrus LT, User Manual

Search results

Summary of Contents for Cirrus LT

Reviews:

Related manuals for Cirrus LT

Brands by name

Popular brands