NCS Cirrus LT User Manual Download Page 6

Page: 6 / 157

Cirrus LT User Manual v2.3

Safety Instructions

DO NOT block the opening vents provided for ventilation. Blocking these vents may cause
the computer processor to overheat.

• DO NOT

place your notebook on an unstable or uneven surface.

• DO NOT

place or drop heavy objects on your notebook.

• DO NOT

apply heavy pressure on your notebook.

• DO NOT

press or touch the display panel.

• DO NOT

use your notebook under harsh conditions.

• DO NOT

subject your notebook to magnetic fields.

• DO NOT

use or store your notebook in extreme temperatures.

• DO NOT

place your notebook near fire or other sources of heat.

• DO NOT

expose to dust or corrosive materials.

• DO NOT

spray water or any other cleaning fluids directly on the display panel.

• DO NOT

expose your notebook to rain or moisture.

• DO NOT

tamper with the battery. Keep this away from children.

• DO NOT

slam your notebook shut and never pick up or hold your notebook by the

display.

• DO NOT

expose your notebook to sudden changes in temperature or humidity. Keep

your notebook away from air conditioners and heating vents.

• DO NOT

check your notebook in as baggage. If you are traveling, carry it on instead.

Summary of Contents for Cirrus LT






























































































































































Search results

Summary of Contents for Cirrus LT

Reviews:

Related manuals for Cirrus LT

Brands by name

Popular brands

NCS Cirrus LT, User Manual

Search results

Summary of Contents for Cirrus LT

Reviews:

Related manuals for Cirrus LT

Brands by name

Popular brands