Motorola HT 1000 User Manual Download | Manualshive

Page: 87 / 205

background image

81

Menu Timeout Period (sec)

Enter a value directly or use the UP/DOWN arrow keys to specify the
desired value. This is the time period after which the radio will exit
JT1000 or Multiple Select PL programming mode if it does not detect
any keypad activity during this specified period. The timeout period
can be set to any numeric value ranging from one to 30 seconds. This
field can also be set to Disabled.

Pressing an arrow key changes the value in five-second increments,
and pressing

Shift

and an arrow key simultaneously changes the value

in one-second increments.

Note:

When User Programming mode is enabled, normal Dispatch

operation is disabled, and the radio will not unmute to channel
traffic. The timeout feature prevents the radio from remaining in
this state for an extended period of time.

The default is 15 seconds.

Auto-backlight

Use the UP/DOWN arrow keys to enable/disable this feature. If this
option is enabled and the radio user presses the radio keypad or
Channel Up/Down buttons, the display/keypad backlight will be
turned on. The backlight will be on for the length of time (in seconds)
specified in the Backlight Timer field on this screen. Once the
backlight is illuminated, the use of any control with the exception of
PTT and volume will reset the timer and extend the backlight
illumination time. If this option is disabled, only the side button
assigned to the Light function will be turned on or extend the
backlight.

The default is Enabled.

Backlight Timer (sec)

Use the UP/DOWN arrow keys to specify the length of time that the
LCD/keypad backlight will remain illuminated without any keypad or
control activity. Valid settings range from one to 255 seconds in one-
second increments.

The default is 5 seconds.

Alert Tones

Use the UP/DOWN arrow keys to enable/disable this feature. Keypad
alert tones can be used to let the user know whether or not a key is
valid when it is pressed. A high-pitched tone means the key is valid,
and a low-pitched tone means the key is not valid. If this feature is
enabled, the radio will emit keypad alert tones and the Multi-
selectable PL/DPL (MSPL) accept tones will also sound at the
appropriate times.

The default is Enabled.

«
...
85
86
87
88
89
...
»

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Brand: MagicBox Pages: 20

Brand: Sealey Pages: 5

Brand: Zebra Pages: 4

Brand: S-Digital Pages: 4

Brand: Milwaukee Pages: 19

Brand: Radio Shack Pages: 9

Brand: Firman Pages: 57

Brand: EVOLV Pages: 15

Brand: Generac Power Systems Pages: 2

Brand: OWI Pages: 1

Brand: Ranger Communications Pages: 29

Brand: Feider Machines Pages: 35

Power Pod Elite

Brand: Nature's Generator Pages: 20

Brand: Wacker Neuson Pages: 214

Brand: Coleman Pages: 13

Brand: Coleman Pages: 16

Brand: Cobra Pages: 43

AM/FM Radio Tuner

Brand: Boston Acoustics Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands