manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

105

Sticky Revert

This feature is limited to HT 1000 “B” models and VISAR models with 
firmware version 2.06 or later. If this field is enabled on a radio having an 
earlier version firmware, it will have no effect.

Use the UP/DOWN arrow keys to enable/disable this option. If this 
feature is enabled, the radio will operate in Sticky Channel Revert 
mode when in an MDC Emergency state. Sticky Revert is characterized 
by the radio remaining permanently on the Revert channel after the 
MDC Emergency message has been transmitted and acknowledged. 
The radio must be powered off and on in order to return to normal 
channel control.

Note: 

The MDC/STAR/ATIS Decode field on the CHANNEL

CONFIGURATION screen (

F4/F4

) must be set to Enabled. Only then

will the radio be able to decode the Emergency Acknowledgment that
is generated from the MDC fixed equipment. This feature needs to
be enabled only on the Emergency Revert channel and only
when Emergency Revert or Sticky Revert is in use.

The default is Disabled.

Sticky Revert Alert

This feature is limited to HT 1000 “B” models and VISAR models with 
firmware version 2.06 or later. If this field is enabled on a radio having an 
earlier version firmware, it will have no effect.

Use the UP/DOWN arrow keys to enable/disable this option. If this 
feature is enabled, an alert tone will be generated if PTT is pressed 
when the radio is on the Sticky Revert Channel. It reminds the user 
that the radio is transmitting on a channel different from the one 
indicated by the Channel Selector knob. On VISAR models alone, the 
display will correctly indicate the Sticky Revert Channel.

The default is Enabled.

Call Alert

Use the UP/DOWN arrow keys to enable/disable this option. This per-
radio feature is a convenient way for the dispatcher to page a radio 
user. If this feature is enabled, the radio will emit a continuous series 
of four beeps and the LED will flash green when a Call Alert (page) is 
received. The alert will continue until the user acknowledges the page 
and presses the PTT button, or presses and releases the Monitor 
button.

The default is Enabled.

Rx Call Alert Light

Use the UP/DOWN arrow keys to enable/disable this option. If this 
feature is enabled, the radio’s LED will flash green when a Call Alert 
(page) is received.

The default is Enabled.

Rx Select Call Light

Use the UP/DOWN arrow keys to enable/disable this option. If this 
feature is enabled, the Receive Select Call LED will light up when a 
Select Call is received and flash for the entire length of the message. 
The Select Call refers to Quik-Call II, MDC and ATIS Select Call.

The default is Enabled.

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

IDT EVR-100 Owner'S Manual preview
EVR-100
Brand: IDT Pages: 13
Champion 100371 Operator'S Manual preview
100371
Brand: Champion Pages: 36
Sylvania SDVD7040-F Instructions Manual preview
SDVD7040-F
Brand: Sylvania Pages: 18
G-project G-BOOM2 Manual preview
G-BOOM2
Brand: G-project Pages: 20
MAJORITY CB1-DAB-BLK User Manual preview
CB1-DAB-BLK
Brand: MAJORITY Pages: 20
Cristec UEYPOPL/12-4Q/3D Manual preview
UEYPOPL/12-4Q/3D
Brand: Cristec Pages: 54
NextBase SDV17-SQ Operating Instructions Manual preview
SDV17-SQ
Brand: NextBase Pages: 52
S-Digital GB-3300 Quick Start Manual preview
GB-3300
Brand: S-Digital Pages: 4
Racal Instruments AN/TRC-207 Operation And Maintenance Instructions preview
AN/TRC-207
Brand: Racal Instruments Pages: 102
Caltta DH590 Quick Start Manual preview
DH590
Brand: Caltta Pages: 10
Altrad BELLE POKER Operator'S Manual preview
BELLE POKER
Brand: Altrad Pages: 56
kchibo KK-622 User Manual preview
KK-622
Brand: kchibo Pages: 3
Sandstrom S1DAB11E Instruction Manual preview
S1DAB11E
Brand: Sandstrom Pages: 76
Volker FKG-1 User Manual preview
FKG-1
Brand: Volker Pages: 17
Ugo Mini Bazooka 2.0 UBS-1484 User Manual preview
Mini Bazooka 2.0 UBS-1484
Brand: Ugo Pages: 8
Fabco Power HYDRO 300XR-6 Instruction Manual preview
HYDRO 300XR-6
Brand: Fabco Power Pages: 13
Accessory Power GO Groove Audio Morph User Manual preview
GO Groove Audio Morph
Brand: Accessory Power Pages: 8
SLIVE -U Manual preview
-U
Brand: SLIVE Pages: 2

Brands by name

Popular brands

Load more brands