manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

64

Save Workspace 
Data to Archive File

From the MAIN MENU, press 

F3

 and then 

F7

 to access this screen.

The SAVE ARCHIVE function is used to create (or update) an archive 
copy of the codeplug information on a disk. To save the contents of 
the work space to a personality file, enter the desired name in the 
Archive file name field, specify the correct archive path, and press 

F8

. 

The RSS will prompt you to press 

F8

 again to save the work space to 

the personality file. Press 

F10

 to cancel the request to save the file.

If a file with the same name already exists in the archive path specified, 
the RSS will display a warning and request you to press 

F8

 to overwrite 

the existing file with the contents of the work space or press 

F10

 to 

cancel the request to overwrite the file.

Note: 

You are STRONGLY encouraged to make an archive copy

of every radio installed or serviced in order to be able to quickly
restore customer information in case of a codeplug failure.

Function Key Descriptions

F8

 - SAVE ARCHIVE

Saves the archive file to the path specified (or to the default path if no 
path is specified). Do NOT press 

F8

 until you have entered the archive file 

name.

Field Definitions

Archive Path

This is the DOS name of the archive file. The standard DOS file naming 
convention must be used, i.e., one- to eight- character alphanumeric 
name appended with a one- to three-character alphanumeric 
extension (xxxxxxxx.yyy). This must be no more than eight characters 
with a three-character extension. The archive file name may be 
changed if an alternative radio tracking method is to be used.

Archive file name

Enter the name of the file in which the work space contents should be 
saved.

CG

MOTOROLA Radio Service Software         Use edit keys to modify entry.       
HT/JT1000/VISAR   Model :               Use <Enter> to go to next feature.   
                  Serial:                                                    
GET-SAVE:SAVE FILE                                                           

                      Save Workspace Data to Archive File                    
                      -----------------------------------                    
 Archive path: C:\MRSS\HTJT\ARC                                              
                                                                             
                                                                             
                                                                             
                                                                             
                             Archive file name: 402ATE03.40                  
                                                                             
                                                                             
                                                                             
                                                                             
                                                                             
                                                                             

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10 
HELP                                                    SAVE            EXIT 
                                                        FILE                 

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Samsung DVD-L100 Manual preview
DVD-L100
Brand: Samsung Pages: 68
Tait TM8100 mobiles Wiring Diagram preview
TM8100 mobiles
Brand: Tait Pages: 4
Tait TP9100 Product Safety And Compliance Information preview
TP9100
Brand: Tait Pages: 14
Tait TM8100 mobiles Installation Manual preview
TM8100 mobiles
Brand: Tait Pages: 48
Tait t2020 Operator'S Manual preview
t2020
Brand: Tait Pages: 27
Tait t2020 User Manual preview
t2020
Brand: Tait Pages: 52
Tait Orca 5010 User Manual preview
Orca 5010
Brand: Tait Pages: 2
Axess SPBT1032 User Manual preview
SPBT1032
Brand: Axess Pages: 6
Kaide KK-9905 User Manual preview
KK-9905
Brand: Kaide Pages: 4
SOUNDMASTER RCD5000SW Manual preview
RCD5000SW
Brand: SOUNDMASTER Pages: 38
Telefunken TF-1592 Instruction Manual preview
TF-1592
Brand: Telefunken Pages: 13
Mitsubishi DY-3A66U-AL Service Manual preview
DY-3A66U-AL
Brand: Mitsubishi Pages: 47
Crosley CR612 Instruction Manual preview
CR612
Brand: Crosley Pages: 7
Lamborghini Caloreclima ERA F 30 B 60 Instructions Manual preview
ERA F 30 B 60
Brand: Lamborghini Caloreclima Pages: 112
Westinghouse WGen12000DFc User Manual preview
WGen12000DFc
Brand: Westinghouse Pages: 103
Generac Power Systems PowerPact G0069981 Owner'S Manual preview
PowerPact G0069981
Brand: Generac Power Systems Pages: 36
King Canada KCG-1501G Instruction Manual preview
KCG-1501G
Brand: King Canada Pages: 11
SMC Networks SMCRPUPOE Specifications preview
SMCRPUPOE
Brand: SMC Networks Pages: 2

Brands by name

Popular brands

Load more brands