manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

186

Communications port

See COMport.

Database

An organized file containing records or related data.

Data entry screen

Formatted display with highlighted fields for entering data or 
parameters.

Data Operated Squelch

See “DOS”.

Defaults

Standard settings that the RSS uses for I/O port locations, file locations 
and display settings.

Default Drive

The disk or diskette drive that the RSS will use to get or save data or 
files. You can change the default drive from the SERVICE SOFTWARE 
CONFIGURATION MENU.

Default field value

The values a field will automatically contain if a user does not 
specifically change it.

Directory

A location for a group of files on a disk/diskette which are similar in 
content.

Diskette

An alterable, semi-flexible, magnetic storage medium used by 
microcomputers to store data and files. Also called a disk, floppy disk, 
or mini diskette. The RSS is delivered on diskettes.

Diskette drive

A disk drive that uses removable magnetic diskettes.

Display

The CRT terminal that the computer displays information on.

DOS

Data Operated Squelch. When enabled, DOS will detect an incoming 
packet of the same signalling scheme as the radio, and squelch the 
audio for the duration of the packet. A small blip of data will be heard, 
but most of the packet will not be heard.

EEPROM

Electronically Erasable Programmable Read Only Memory. Used by the   
radio microcomputer system to store the radio’s codeplug data 
(personality).

Emergency Alarm

A feature that triggers an alarm output on a console when an 
emergency signalling message is received.

Encoder features

Features relating to transmit (or encode) portion of a signalling system 
or systems.

Error

Any condition that prevents the RSS from functioning normally or 
any input/response that deviates from what the RSS was designed to 
accept. The RSS typically displays an error message and the computer 
“beeps”.

Exit

To leave the current display screen and return to the previous screen. 
The RSS uses the 

F10

 function key for all exit operations.

Field

The modifiable area located next to a feature on the screen. The 
currently selected field is always highlighted.

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Hama DIR3510SCBTX Quick Manual preview
DIR3510SCBTX
Brand: Hama Pages: 120
Wacker Neuson GPS 8500 Repair Manual preview
GPS 8500
Brand: Wacker Neuson Pages: 60
Logik LCRAD14 Instruction Manual preview
LCRAD14
Brand: Logik Pages: 2
Philco PRR1005BT Owner'S Manual preview
PRR1005BT
Brand: Philco Pages: 7
Logik LPDAB10 Instruction Manual preview
LPDAB10
Brand: Logik Pages: 24
QUAD ESL 2805 Brochure & Specs preview
ESL 2805
Brand: QUAD Pages: 20
Insignia NS-P10DVD18 Quick Setup Manual preview
NS-P10DVD18
Brand: Insignia Pages: 2
Binatone Terrain 200 User Manual preview
Terrain 200
Brand: Binatone Pages: 2
LawnMaster BQH3500 Safety And Operating Manual preview
BQH3500
Brand: LawnMaster Pages: 28
Lifetech LifeOX-AIR Ozzy User Manual preview
LifeOX-AIR Ozzy
Brand: Lifetech Pages: 17
G-Power America GN130000EW Owner'S Manual preview
GN130000EW
Brand: G-Power America Pages: 53
ZUM Radio ZUMspot-USB Quick Start Manual preview
ZUMspot-USB
Brand: ZUM Radio Pages: 40
Schumacher SL1404 Owner'S Manual preview
SL1404
Brand: Schumacher Pages: 7
Landa NG-3000 Operator'S Manual preview
NG-3000
Brand: Landa Pages: 30
ASCO POWER TECHNOLOGIES Series 300 Operator'S Manual preview
Series 300
Brand: ASCO POWER TECHNOLOGIES Pages: 18
Philips SBA220/00 Instructions For Use preview
SBA220/00
Brand: Philips Pages: 1
Philips SBA1700/00 Specifications preview
SBA1700/00
Brand: Philips Pages: 2
Philips SBA1700/00 Instructions For Use preview
SBA1700/00
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands