Motorola HT 1000, User Manual

Page: 137 / 205

131
DTMF Digit Duration (ms) Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the actual time that DTMF tones will be transmitted
on the channel for a single digit during auto-dial, or manual dial if a
timed tone duration is selected. The range is 4.12 to 1050.6 ms in 4.12-
ms increments.
Note: A value of zero is NOT allowed.
The default is 152.44 ms.
DTMF Inter-Digit Delay (ms) Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the time period that carrier or carrier with PL (if on a
PL channel) will be transmitted between DTMF digits during auto dial.
The range is 4.12 to 1050.6 ms in 4.12-ms increments.
Note: A value of zero is NOT allowed.
The default is 103 ms.
DTMF Access Code Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the code used to access the fixed end telephone
interconnect equipment. Some conventional interconnect systems
require a “*” to access the telephone line. Other systems require a
multi-digit access code which consists of one to four digits and may or
may not contain a “*”. Multi-digit access codes are used to prevent
unauthorized access to the telephone interconnect system.
DTMF De-Access Code Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the code that causes the telephone interconnect
equipment to release the phone connection. It may contain any legal
DTMF digit. Release codes are used to improve system loading by
eliminating dead air time after interconnect calls are completed.