manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

117

STAR Options

From the MAIN MENU, press 

F4, F3, F7 

and then 

F3

 twice to access 

this screen.

This screen CANNOT be accessed for JT1000 model radios. From this 
screen, you can configure additional GE STAR signalling options.

Function Key Descriptions

F5

 - PRINT

Prints the current system configuration.

F9

 - DEFAULT

Resets the fields on this screen to their default values.

Field Definitions

Pretime

Enter the desired value directly or use the UP/DOWN arrow keys to 
make your selection. Pretime is the period of time between transmitter 
key-up and the first bit of a data transmission during which the 
transmitted carrier may be modulated or unmodulated. In the case of 
STAR data, the carrier is unmodulated. This pretime period allows the 
receiving unit to stabilize so the data can be recovered. The duration 
of pretime can be set from 0 (zero) and 2550 ms in 10-ms increments.

The default is 500 ms.

Number of Impolites

Enter the desired value directly or use the UP/DOWN arrow keys to 
make your selection. This is the number of times the radio will 
transmit in an “impolite” fashion. An impolite transmission is one 
where the radio transmits regardless of whether or not anyone else is 
currently transmitting on the same channel. This number can range 
from 0 (zero) to 254 in increments of 1. A value of Infinite is also 
available in which case the radio will continue to transmit until an 
acknowledgment is received, the battery runs down, or the radio is 
powered off.

The default is 15.

DCGCC

MOTOROLA Radio Service Software         Use 

<:

 keys to scroll value.          

HT/JT1000/VISAR   Model :               Use <Enter> to go to next feature.    
                  Serial:                                                     
CHANGE:RADIO:SIG:STAR:OPT                                                     

                                 STAR Options                                 
                                 ------------                                 
                                                                              
                      Pretime (ms)................. 500                       
                                                                              
                      Number of Impolites............15                       
                                                                              
                      Emerg Long Press Period (sec)...5                       
                                                                              
                      Mandown Pre-Alert Delay (sec)...5                       
                                                                              
                      Mandown Post-Alert Delay (sec)..5                       
                                                                              
                                                                              

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10  
HELP                           PRINT                          DEFAULT   EXIT  
                                                                              

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

MagicBox Arden Manual preview
Arden
Brand: MagicBox Pages: 20
Belkin F5X007 Quick Start preview
F5X007
Brand: Belkin Pages: 1
Ibiza sound RAINBOW1000 Manual preview
RAINBOW1000
Brand: Ibiza sound Pages: 28
T&D EADS THR880i User Manual preview
EADS THR880i
Brand: T&D Pages: 125
MG BSKA 14 EV SS curve Operating Manual preview
BSKA 14 EV SS curve
Brand: MG Pages: 96
Fronius TransArc 150 Leybold Operating Instructions/Spare Parts List preview
TransArc 150 Leybold
Brand: Fronius Pages: 21
Master Tailgaters RAD-V1 User Manual preview
RAD-V1
Brand: Master Tailgaters Pages: 6
Powermate PM0505622.18 User Manual preview
PM0505622.18
Brand: Powermate Pages: 12
SDMO PHOENIX 7300T Instruction And Maintenance Manual preview
PHOENIX 7300T
Brand: SDMO Pages: 66
Rampage 1285729 Owner'S Manual preview
1285729
Brand: Rampage Pages: 32
Ericsson MDX LBI-39014A Maintenance Manual preview
MDX LBI-39014A
Brand: Ericsson Pages: 16
NextBase SDV47-A Operating Instructions Manual preview
SDV47-A
Brand: NextBase Pages: 45
Acoustic Research ART7 User Manual preview
ART7
Brand: Acoustic Research Pages: 96
QooPro Music Angel 12022 User Manual preview
Music Angel 12022
Brand: QooPro Pages: 4
DMB HEPBURN MK-II Quick Start Manual preview
HEPBURN MK-II
Brand: DMB Pages: 24
Vislink DXL8000 User And Technical Manual preview
DXL8000
Brand: Vislink Pages: 46
Tait T8000 Wiring Diagram preview
T8000
Brand: Tait Pages: 12
Tait TM8105 User Manual preview
TM8105
Brand: Tait Pages: 32

Brands by name

Popular brands

Load more brands