manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

59

Get Workspace 
Data From Archive 
File 

From the MAIN MENU, press 

F3

 twice to access this screen.

The GET ARCHIVE function is used to retrieve an archive file from a 
disk. Once retrieved, the file may be modified using the CHANGE/
VIEW functions or programmed into a radio. Press 

Tab

 to select the 

serial number of the radio to be retrieved. Press 

F8

 to retrieve the 

selected file.

The archive path can be changed from this screen, but only for the 
current execution of the program. To change the archive path from this 
screen, press 

Shift-Enter

 to navigate to the archive path. Letter, 

number and edit keys are valid in this field.

Function Key Descriptions

F3

 -SHOW INFO

To view the model number and customer information that 
corresponds to each date and file name, press 

F3

. This function can be 

configured two ways. If Auto is selected, the date, model number, and 
customer information are displayed for each file name. If Manual is 
selected, only the date is displayed for each file name. The default is 
Manual.

F5

 - PRINT ARCHIVE

Used to print a list containing the personality file names along with 
their corresponding model number, customer, and date information.

F6

 - FIND FILE

Used to search for a specific file. Enter the file name and press 

Enter

. If 

the file is found in the current archive directory, its file name will be 
highlighted on the screen. In the event that the list of file names 
extends to more than one page, the 

PgUp/PgDn

 keys can be used to 

move from one page to another.

F8

 - GET SELECTED

Loads the selected file into the work space. Loading a new file will 
replace the current contents of the work space with the new 
personality file. The model number will be updated on the screen 
when the new personality file is loaded into the work space.

CC

MOTOROLA Radio Service Software         Use edit keys to modify entry.       
HT/JT1000/VISAR   Model :               Use <Enter> to go to next feature.   
PAGE 1  OF 1      Serial:                                                    
GET-SAVE:GET FILE                                                            

                     Get Workspace Data from Archive File                    
                     ------------------------------------                    
  Archive path: C:\MRSS\HTJT\ARC                                             
                                                                             
  Model no..                 Customer...                  Date..19-Apr-96    
                                                                             
  1KDC9AA1.DN                                                                
  1KDC9AA3.DN                                                                
                                                                  
                                                                  
                                                                  
                                                                  
                                                                 
                                                                  
                                                                  

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10 
HELP            SHOW           PRINT    FIND            GET             EXIT 
                INFO          ARCHIVE   FILE          SELECTED               

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Radwin 5000 Configuration Manual preview
5000
Brand: Radwin Pages: 252
Radwin 5000 Reference Manual preview
5000
Brand: Radwin Pages: 6
4RF Aprisa SR+ Quick Start Manual preview
Aprisa SR+
Brand: 4RF Pages: 2
Hama Badradio SR-300 Operating Instruction preview
Badradio SR-300
Brand: Hama Pages: 3
Roberts FM RDS/DAB Digital Radio RD-50CFM User Manual preview
FM RDS/DAB Digital Radio RD-50CFM
Brand: Roberts Pages: 20
Dual MGH25BT Installation & Owner'S Manual preview
MGH25BT
Brand: Dual Pages: 24
Kaide KK-9502L Operating Instructions preview
KK-9502L
Brand: Kaide Pages: 4
QFX R-41 Instruction Manual preview
R-41
Brand: QFX Pages: 6
SOUNDMASTER Highline TR 85 Operating Instructions Manual preview
Highline TR 85
Brand: SOUNDMASTER Pages: 6
Sentry SOUND-BOX HR100 Manual preview
SOUND-BOX HR100
Brand: Sentry Pages: 4
Naxa NPB-255 Instruction Manual preview
NPB-255
Brand: Naxa Pages: 4
Logik L7PDT13E Instruction Manual preview
L7PDT13E
Brand: Logik Pages: 216
Yaesu FT-70DR Instruction Manual preview
FT-70DR
Brand: Yaesu Pages: 32
AnyTone AT-5289 User Manual preview
AT-5289
Brand: AnyTone Pages: 13
Vari GLOBAL PJGCV160 Translation Of The Original Instructions preview
GLOBAL PJGCV160
Brand: Vari Pages: 46
Briggs & Stratton Fortress Installation And Operation Manual preview
Fortress
Brand: Briggs & Stratton Pages: 156
LightSquared MSAT G2 Go-kit User Manual preview
MSAT G2 Go-kit
Brand: LightSquared Pages: 24
MartinLogan Design Series Dimensional Information preview
Design Series
Brand: MartinLogan Pages: 8

Brands by name

Popular brands

Load more brands