manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

37

Receiver Alignment 
Menu

From the MAIN MENU, press 

F2

 and then 

F3

 to access this screen.

From this menu, you can navigate to six screens where various 
alignment settings are specified. Standard periodic receiver alignment 
procedures are performed from this menu. Refer to your Radio Service 
Manual for Receive Alignment procedures.

Function Key 
Descriptions

F2

 - 

F7

Refer to your Radio Service Manual for these procedures. These 
procedures should only be attempted by qualified service personnel.

BC

MOTOROLA Radio Service Software        Please make sure <Caps Lock> is not      
HT/JT1000/VISAR  Model:                enabled before pressing F2-F9.           
                 Serial:                                                        
SERVICE:RCVR ALIGN                                                              
     
                                                                                
                            Receive Alignment Menu                              
                            ----------------------                              
                                                                                
           F1  - HELP                                                           
           F2  - Front End Bandpass Filter Alignment                            
           F3  - Rated Audio Alignment                                          
           F4  - Squelch Alignment 25/30kHz                                     
           F5  - Squelch Alignment 20kHz                                        
           F6  - Squelch Alignment 12.5kHz                                      
           F7  - VCO Crossover Alignment                                        
           F8  -                                                                
           F9  -                                                                
           F10 - Exit, Return to Service Menu                                   
                                                                                
   
  F1      F2      F3      F4       F5       F6      F7     F8      F9    F10    
 HELP    FE BP   RATED  SQUELCH  SQUELCH  SQUELCH   VCO                  EXIT   
         FILTER  AUDIO 25/30 kHz  20kHz   12.5 kHz XOVER                        

!

Caution

These procedures should be attempted only by 
qualified service personnel. Failure to perform 
alignment procedures properly may result in seriously 
degraded radio or system performance.

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Harman Kardon TRAVELER Quick Start Manual preview
TRAVELER
Brand: Harman Kardon Pages: 2
Hamilton HB-100i Operating Instruction preview
HB-100i
Brand: Hamilton Pages: 3
F&U RCD9043BT Instruction Manual preview
RCD9043BT
Brand: F&U Pages: 10
Olympia WebRadio 200 Operating Instructions Manual preview
WebRadio 200
Brand: Olympia Pages: 32
Firman P03504 Operator'S Manual preview
P03504
Brand: Firman Pages: 114
Sunwave CrossFire A2 Commissioning Manual preview
CrossFire A2
Brand: Sunwave Pages: 47
Harman JBL PULSE 3 Service Manual preview
JBL PULSE 3
Brand: Harman Pages: 25
MULTIQUIP GAC3.6HZ Operation And Parts Manual preview
GAC3.6HZ
Brand: MULTIQUIP Pages: 82
Seg CR 105K Operating Instructions Manual preview
CR 105K
Brand: Seg Pages: 111
QFX PBX-621501 User Manual preview
PBX-621501
Brand: QFX Pages: 4
Acterna BN 2255/02 Operating Manual preview
BN 2255/02
Brand: Acterna Pages: 40
Raven GEN 6500E Owner'S Manual preview
GEN 6500E
Brand: Raven Pages: 80
Kohler Power Systems KD Series Installation Instructions preview
Power Systems KD Series
Brand: Kohler Pages: 4
LoopTone DS-R08 Instruction Manual preview
DS-R08
Brand: LoopTone Pages: 5
AeroDiode TOMBAK Operating Manual preview
TOMBAK
Brand: AeroDiode Pages: 79
Aeroflex 2030 Series Operating Manual preview
2030 Series
Brand: Aeroflex Pages: 234
Curtis DVD7015R User Manual preview
DVD7015R
Brand: Curtis Pages: 29
Symbol VRC 8900 Quick Reference Manual preview
VRC 8900
Brand: Symbol Pages: 24

Brands by name

Popular brands

Load more brands