Motorola HT 1000, User Manual

Page: 8 / 205

2
• How to organize your file directories and specify directory paths
for codeplug files
• How to print out radio programming information
• How to clone (or program identical information into several)
radios
To locate the information you need, use the Table of Contents and/or
the Index. Explanations of technical terms used in this manual can be
found in the Glossary.
Watch for WARNINGS, CAUTIONS and NOTES which can be found
throughout this manual, the definitions of which are provided below:
What italicized text means: Special notes about field and model
dependencies are italicized throughout this manual so that they are
easy to locate. An example is reproduced below:
A codeplug must be loaded into your computer’s memory
(using GET/SAVE/PROGRAM MENU functions) before you
will be allowed to access the CHANGE/VIEW MENU (
F4 )
and related screens.
For any problem(s) not covered by the Radio Service Software User’s
Manual or the Radio Service Manual, contact your local Motorola field
technical representative.
Prerequisites
To program radios using the RSS, we recommend a basic working
knowledge of the following:
• Microcomputers
• The radio’s available features (refer to the appropriate Radio
Operator’s Manual)
• Your customers’ needs
• MS-DOS operating system, version 5.0 or later
WARNING
An operational procedure, practice, or condition,
etc., which may result in injury or death if not
carefully observed.
Caution
An operational procedure, practice, or condition, etc.,
which may result in damage to the equipment if not
carefully observed.
Note: An operational procedure, practice, or condition, etc., which
is important to emphasize.
!
!