manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

141

CHANNEL CONFIGURATION screen (for JT1000 models only, with Rx 

Only Channel field enabled)

CHANNEL CONFIGURATION screen (for (HT 1000 and VISAR models 

only, with Rx Only Channel field enabled)

This screen allows you to configure channels. It will vary based on the 
radio model of the codeplug currently loaded into the workspace.

Function Key Descriptions

F2

 - CHAN OPTIONS

Brings up a screen from which you can configure additional channel 
options.

F3

 - PREVIOUS CHANNEL

Accesses the previous channel.

F4

 - NEXT CHANNEL

Accesses the next channel.

F5

 - PRINT

Prints the current system configuration.

F9

 - DEFAULT

Resets the fields on this screen to their default values.

MOTOROLA Radio Service Software         Use 

<:

 keys to scroll value.          

HT/JT1000/VISAR   Model :H01KDH9PA3AN   Use <Enter> to go to next feature.     
                  Serial:                                                      
CHANGE:CHANNEL                                                                

                             Channel Configuration                            
                             ---------------------                            
                                                                              
 Channel..... 1                         Programmed.......Yes                  
                                                                              
 Rx Frequency (MHz)..........136.07500  Receive Squelch...................TPL 
                                         
                                          TPL Tone................85.4 Hz  YA 
                                         
 Rx Only Channel.............. Enabled                                        
                                                                              
                                                                              
                                                                              
                                        Keypad Programming............Enabled 
                                                                              

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10  
HELP    CHAN  PREVIOUS  NEXT   PRINT                          DEFAULT   EXIT  
      OPTIONS CHANNEL CHANNEL                                                 

MOTOROLA Radio Service Software        Use 

<:

 keys to enable/disable feature.

HT/JT1000/VISAR   Model :              Use <Enter> to go to next feature.    
                  Serial:                                                     
CHANGE:CHANNEL                                                                

                             Channel Configuration                            
                             ---------------------                            
                                                                              
 Channel......1                         Programmed.......Yes                  
                                                                              
 Rx Frequency (MHz)..........851.01250  Receive Squelch...................TPL 
                                                                              
                                          TPL Tone...............127.3 Hz  3A 
                                                                              
 Rx Only Channel...............Enabled                                        
                                                                              
 Stat-Alert/ATIS Sel-Call.....Disabled                                        
                                                                              
 MDC/STAR/ATIS Decode.........Disabled                                        
                                                                              

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10  
HELP    CHAN  PREVIOUS  NEXT   PRINT                          DEFAULT   EXIT  
      OPTIONS CHANNEL CHANNEL                                                 

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

MagicBox Arden Manual preview
Arden
Brand: MagicBox Pages: 20
Tait TM8100 mobiles Wiring Diagram preview
TM8100 mobiles
Brand: Tait Pages: 4
Tait TP9100 Product Safety And Compliance Information preview
TP9100
Brand: Tait Pages: 14
Tait TM8100 mobiles Installation Manual preview
TM8100 mobiles
Brand: Tait Pages: 48
Tait t2020 Operator'S Manual preview
t2020
Brand: Tait Pages: 27
Tait t2020 User Manual preview
t2020
Brand: Tait Pages: 52
Tait Orca 5010 User Manual preview
Orca 5010
Brand: Tait Pages: 2
BANDELIN SONOREX TECHNIK TG Series Assembly Instructions Manual preview
SONOREX TECHNIK TG Series
Brand: BANDELIN Pages: 25
Audiovox Xpress XMCK-20KC Quick Manual preview
Xpress XMCK-20KC
Brand: Audiovox Pages: 2
Salora CR624DAB Instruction Manual preview
CR624DAB
Brand: Salora Pages: 35
GOgroove SonaWAVE SRK User Manual preview
SonaWAVE SRK
Brand: GOgroove Pages: 5
Audial D88 Instruction Manual preview
D88
Brand: Audial Pages: 23
cecotec 49443 Instruction Manual preview
49443
Brand: cecotec Pages: 13
Hytera MD61X Manual preview
MD61X
Brand: Hytera Pages: 24
Power Stroke PS906800 Series Operator'S Manual preview
PS906800 Series
Brand: Power Stroke Pages: 72
auna RCD-230 Manual preview
RCD-230
Brand: auna Pages: 18
Xoro HBD 1000 User Manual preview
HBD 1000
Brand: Xoro Pages: 122
ETQ TG72B12 User Manual preview
TG72B12
Brand: ETQ Pages: 22

Brands by name

Popular brands

Load more brands