manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

164

Print Codeplug Configuration Menu (JT1000 models only)

Print Codeplug Configuration Menu (VISAR models only)

The PRINT function is used to produce permanent records of codeplug 
configurations. A printer is required and should be connected to your 
computer according to instructions in the user’s manual that came 
with your computer. Graphics capability is NOT required.

You must first read or get a codeplug using the GET/SAVE functions in 
order to print radio configuration data.

Each print-out contains radio model and serial number information, 
software version numbers, Radio Service Software version numbers, 
and the date and time of the print-out.

Note: 

When printing, misalignment of page breaks may result if

the printer is not set up properly. For best results, configure the
printer as an IBM ProPrinter or an Epson FX/MX having factory
default settings. The default number of lines per page is 66.

MOTOROLA Radio Service Software         Select a function key, F1-F10.        
HT/JT1000/VISAR  Model : H05RDD9AA7AN                                         
                 Serial:                                                      
PRT MAIN:CODEPLUG:CONFIG                                                      
                                       

 

                                      

                       Print Codeplug Configuration Menu                      
                       ---------------------------------                      
                                                                              
      F1  - HELP                                                              
      F2  - System Configuration                                              
      F3  - Side Button Configuration                                         
      F4  - Alert Tone Configuration                                          
      F5  - JT1000 Options                                                    
      F6  - Mode Switch Position Assignment                                   
      F7  - Signalling Options                                                
      F8  - Scan List Channels                                                
      F9  - Print All the Above                                               
      F10 - EXIT                                                              
                                                                              
                                                                              
                                                                              
 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10  
HELP   PRINT   PRINT   PRINT   PRINT   PRINT   PRINT   PRINT   PRINT    EXIT  
       SYSTEM BUTTONS  TONES   JT1000  MODE     SIG     SCAN    ALL           

MOTOROLA Radio Service Software         Select a function key, F1-F10.        
HT/JT1000/VISAR  Model : H05UCD6AA4AN                                         
                 Serial:                                                      
PRT MAIN:CODEPLUG:CONFIG                                                      
                                       

 

                                      

                       Print Codeplug Configuration Menu                      
                       ---------------------------------                      
                                                                              
      F1  - HELP                                                              
      F2  - System Configuration                                              
      F3  - Side Button Configuration                                         
      F4  - Alert Tone Configuration                                          
      F5  - VISAR Options                                                     
      F6  -                                                                   
      F7  - Signalling Options                                                
      F8  - Scan List Channels                                                
      F9  - Print All the Above                                               
      F10 - EXIT                                                              
                                                                              
                                                                              
                                                                              
 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10  
HELP   PRINT   PRINT   PRINT   PRINT           PRINT   PRINT   PRINT    EXIT  
       SYSTEM BUTTONS  TONES   VISAR            SIG     SCAN    ALL           

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

TIDRADIO TD-H6 Programming Manual preview
TD-H6
Brand: TIDRADIO Pages: 11
Magnavox MPD720 Quick Use Manual preview
MPD720
Brand: Magnavox Pages: 2
Quipall 2200I Operator'S Manual preview
2200I
Brand: Quipall Pages: 26
LNI 69208018 Operating Manual preview
69208018
Brand: LNI Pages: 42
MAJORITY Fulbourn II FUL-DAB-BLK-2 Instruction Manual preview
Fulbourn II FUL-DAB-BLK-2
Brand: MAJORITY Pages: 27
Icar MICROfix Installation And Operation Manual preview
MICROfix
Brand: Icar Pages: 2
VDH Products PROBA Installation And Operating Manual preview
PROBA
Brand: VDH Products Pages: 78
MULTIQUIP GA-2.5H Specifications preview
GA-2.5H
Brand: MULTIQUIP Pages: 4
Grundig World Receiver G-2000A Features preview
World Receiver G-2000A
Brand: Grundig Pages: 2
Talkpod N4X Owner'S Manual preview
N4X
Brand: Talkpod Pages: 12
Clatronic IR 7004 BT Instruction Manual preview
IR 7004 BT
Brand: Clatronic Pages: 24
Durabrand PDV-722 Instruction Manual preview
PDV-722
Brand: Durabrand Pages: 34
VICI DBS NM PLUS User Manual preview
NM PLUS
Brand: VICI DBS Pages: 41
flamco Flexfiller 125D Operation & Maintenance Manual preview
Flexfiller 125D
Brand: flamco Pages: 44
Tait TP8135 User Manual preview
TP8135
Brand: Tait Pages: 120
CAMPAGNOLA POWER 12 Use And Maintenance Manual preview
POWER 12
Brand: CAMPAGNOLA Pages: 70
FCA US 17UC84AN-526-ARA-AA Owner'S Manual preview
17UC84AN-526-ARA-AA
Brand: FCA US Pages: 119
GME TX3340 Instruction Manual preview
TX3340
Brand: GME Pages: 28

Brands by name

Popular brands

Load more brands