Motorola HT 1000, User Manual

Page: 129 / 205

123
Singletone Options
(JT1000, VISAR and
HT 1000 “B” or Later
Models only)
From the MAIN MENU, press F4, F3, F7, and then F4 to access this
screen.
This function is applicable to VISAR, HT 1000 “B”, and JT1000 models
only. From this screen, you can configure Single Tone options.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Frequency Enter a value directly or use the UP/DOWN arrow keys to make your
selection. The two frequency fields specify the tone frequencies for
Singletone #1 and Singletone #2. The frequencies can range from 299
to 3011 Hz.
When you enter a frequency or scroll to a new value and exit the
screen, the value may change by a few Hz when you return to this
screen. This is because the frequency is encoded and then decoded
when you exit and re-enter the screen. The frequency displayed is the
nearest encodable frequency to the frequency entered, and will not
differ from the frequency entered by more than 0.5% except at the
upper end of the frequency range, where it may vary as much as 1.0%.
These are the only fields which apply individually to the two Single Tones.
Singletone Duration Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the time duration of the Single Tone transmission.
The time can range from 132 ms to 33000 ms in 132-ms increments.
The default is 1056.
DCGD
MOTOROLA Radio Service Software Use
<:
keys to scroll value.
HT/JT1000/VISAR Model : Use <Enter> to go to next feature.
Serial:
CHANGE:RADIO:SIG:SINGLETONE
SINGLETONE OPTIONS
------------------
Singletone #1 Singletone #2
Frequency.................... 299 Hz Frequency................3011 Hz
Duration.....................1056 ms Side button accept tone...Disabled
Singletone TX Pretime.........250 ms
Singletone Sidetone............Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT DEFAULT EXIT