Motorola HT 1000, User Manual

Page: 23 / 205

17
Setup Computer
Configuration
To begin configuring RSS defaults, press F9 at the MAIN MENU. This
will bring up the SETUP COMPUTER CONFIGURATION screen.
From this screen, you can set up archive paths, and the serial port
(COM1 to COM4) that will be used by the computer to communicate
with the radio. Setting the proper defaults eliminates the need to
specify this information every time you run the RSS.
Function Key Descriptions
F3 - COM TEST
(Communications Test)
Used to verify if your computer is set up correctly and is able to READ
and PROGRAM a radio codeplug properly. After the computer and RIB
have been connected and the appropriate serial port selected, turn on
your radio and execute the COM TEST function by pressing
F3 .
This function will verify if your system is functioning properly by
sending commands to the radio and checking for the proper response.
No codeplug changes will result from these commands. If the
connections are okay, you will hear a beep, and the words
“Communications With The Radio Was Successful” will appear in the
instruction area.
Otherwise, error messages will be displayed. Make sure that all cables
and power supplies are connected according to instructions provided
on page 4 of this manual.
Note: A list of computer-to-communication error codes is
provided in the Appendix.
F8 - SAVE Used to save configuration information to a file in the current
directory. Every time you use the RSS, the configuration that you saved
LAST will be used. The configuration may be modified and saved at
any time.
Note: Be sure to save your settings before you exit this screen.
I
MOTOROLA Radio Service Software Enter path name.
HT/JT1000/VISAR Model :
Serial:
SETUP
Setup Computer Configuration
----------------------------
DEFAULT NAMES
Archive......C:\MRSS\HTJT\ARC
RIB.............COM1
Info..........Manual
Display.......Color2
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP COM SAVE EXIT
TEST