manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

61

Clone (Copy) Data 
to Another Radio

From the MAIN MENU, press 

F3

 and then 

F5

 to clone data from one 

radio to another.

 A radio and a RIB must be properly connected to the computer and the power 
turned on before you attempt the PROGRAM RADIO (

F8

) function. The 

CLONE radio function is used to copy codeplug information from one 
radio to another. Only radios with the same model number can be cloned.

Note: Please read the important notes on Cloning provided
on the following page.

Cloning the radio will replace the radio's codeplug with the contents 
of the current work space. The source of the work space data can be 
either an archive file or another radio. Pressing 

F8

 will bring up the 

screen shown below.

Attach the radio whose contents you want to replace with the current 
work space, and press 

F8

 to continue cloning or 

F10

 to cancel cloning.

CE

MOTOROLA Radio Service Software         Select a function key, F1-F10.       
HT/JT1000/VISAR   Model :                                                    
                  Serial:                                                    
GET-SAVE-CLONE                                                               

                              Get-Save-Clone Menu                            
                              -------------------                            
                                                                             
      F1  - HELP                                                             
      F2  - Read Data from Radio                                             
      F3  - Get Workspace Data from Archive File                             
      F4  -                                                                  
      F5  - Clone (Copy) Data to another Radio                               
      F6  -                                                                  
      F7  - Save Workspace Data to Archive File                              
      F8  - Program Data into Radio                                          
      F9  -                                                                  
      F10 - EXIT, Return to Main Menu                                        
                                                                             
                                                                             

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10 
HELP    READ    GET            CLONE            SAVE   PROGRAM          EXIT 
       RADIO    FILE                            FILE    RADIO                

CLONING the radio will replace the contents of the radio's
     codeplug with the current contents of the workspace. 
                                                          
F8  - continue the cloning request.                       
F10 - cancel cloning request.                             
                                                          
Press F8 or F10.                                          

MOTOROLA Radio Service Software         Select a function key, F1-F10.       
HT/JT1000/VISAR   Model :                                                    
                  Serial:                                                    
GET-SAVE-CLONE                                                               

                              Get-Save-Clone Menu                            
                              -------------------                            
                                                                             
      F1  - HELP                                                             
      F2  - Read Data from Radio                                             
      F3  - Get Workspace Data from Archive File                             
      F4  -                                                                  
      F5  - Clone (Copy) Data to another Radio                               
      F6  -                                                                  
      F7  - Save Workspace Data to Archive File                              
      F8  - Program Data into Radio                                          
      F9  -                                                                  
      F10 - EXIT, Return to Main Menu                                        
                                                                             
                                                                             

 F1      F2      F3      F4      F5      F6      F7      F8      F9      F10 
HELP    READ    GET            CLONE            SAVE   PROGRAM          EXIT 
       RADIO    FILE                            FILE    RADIO                

Please attach the next target radio whose contents you want
      to replace

F8  - continue the cloning request.                       
F10 - cancel cloning request.                             
                                                          
Press F8 or F10.                                          

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

Nady Audio 4180 Owner'S Manual preview
4180
Brand: Nady Audio Pages: 8
Yaesu VX-3R Manual preview
VX-3R
Brand: Yaesu Pages: 2
Yaesu FTM-400XDR Field Manual preview
FTM-400XDR
Brand: Yaesu Pages: 2
TR TR3X User Manual preview
TR3X
Brand: TR Pages: 16
Olin PD-7700 User Manual preview
PD-7700
Brand: Olin Pages: 31
Sven PS-36 Operation Manual preview
PS-36
Brand: Sven Pages: 16
X-Micro P3 Player FM RADIO EARPHONE User Manual preview
P3 Player FM RADIO EARPHONE
Brand: X-Micro Pages: 2
Vidao PDV910KIT Instruction Manual preview
PDV910KIT
Brand: Vidao Pages: 16
Hantek HDG3000B Series User Manual preview
HDG3000B Series
Brand: Hantek Pages: 102
Teac Ghetto Blaster PBT1000 User Manual preview
Ghetto Blaster PBT1000
Brand: Teac Pages: 12
V-Zon TF3DVD7019 Instruction Manual preview
TF3DVD7019
Brand: V-Zon Pages: 26
Pyle PPHP854B User Manual preview
PPHP854B
Brand: Pyle Pages: 4
jcb G220RS Quick Start Manual preview
G220RS
Brand: jcb Pages: 32
LENCO PDR-03 Instruction Manual preview
PDR-03
Brand: LENCO Pages: 79
iHome iHM63 User Manual preview
iHM63
Brand: iHome Pages: 2
Sylvania SDVD 7026 User Manual preview
SDVD 7026
Brand: Sylvania Pages: 12
RTS DV 2400 Series Service Manual preview
DV 2400 Series
Brand: RTS Pages: 40
Logic 7? Dual Instruction Manual preview
7? Dual
Brand: Logic Pages: 36

Brands by name

Popular brands

Load more brands