manualshive.com logo in svg

Motorola HT 1000, User Manual

The Motorola HT1000 is a versatile two-way radio designed for seamless communication in demanding environments. Unlock its full potential with the comprehensive User Manual, available for free download from our website. Easily access detailed instructions and optimize your experience with this reliable and rugged communication tool.

Share
Download
background image

138

Nuisance Delete

Use the UP/DOWN arrow keys to enable/disable this feature. If this 
option is enabled, the user will be able to temporarily delete a busy 
channel from the scan list while the radio is scanning. To delete a busy 
channel, the user will have to press Side Button 1 (blue button) while 
the radio is locked on the nuisance channel. The channel will be 
deleted from the list until scan is shut off. The channel will reappear 
in the list the next time scan is turned on.

The default is Enabled.

Selectable Channel Unmute

Use the UP/DOWN arrow keys to enable/disable this feature. If this 
option is enabled, the unmuting logic of the MDC or Quik-Call II 
decode will be forced to be true during scan for both priority and non-
priority channels. Detection of carrier (and PL if enabled) alone will 
cause the radio to lock onto the channel. The normal decode function 
of the Quik-Call II or MDC will still be active on a locked-on channel 
and will generate an alert if a page is received.

Note: 

Be sure to consider if the use of the Priority Channel Unmute

feature would be more appropriate for a given situation. Priority
Channel unmute is more restrictive and will cause the radio to
unmute to less traffic than Selectable Channel Unmute.

The default is Disabled.

Quik-Call II Scan

Use the UP/DOWN arrow keys to enable/disable the scanning of Quik-
Call on priority and non-priority channel if the Quik-Call II decode 
option is enabled on those channels on the CHANNEL 
CONFIGURATION screen (

F4/F4

).

The default is Enabled.

MDC Decode Scan

This feature is not available on JT1000 models. Use the UP/DOWN arrow 
keys to enable/disable this feature. If this option is enabled, the MDC 
decoder will be enabled on priority and non-priority channels during 
scan. For this feature to work, MDC decode must be enabled on these 
channels on the CHANNEL CONFIGURATION screen (

F4/F4

).

Note: 

This feature must be enabled if scanning of the MDC Selective

Call decode option is required.

The default is Enabled.

MDC Selective Call Scan

This feature is not available on JT1000 models. Use the UP/DOWN arrow 
keys to enable/disable this feature. If this feature is enabled, the 
scanning of MDC Selective Call will be enabled on priority and non-
priority channels provided MDC decode is enabled in that channel on the 
CHANNEL CONFIGURATION screen (

F4/F4

).

Note: 

MDC Decode Scan MUST be enabled if you want to use this

feature.

The default is Enabled.

Summary of Contents for HT 1000














































































































































































































Reviews:

No comments

Related manuals for HT 1000

MAJORITY CB4A-DAB-WHT User Manual preview
CB4A-DAB-WHT
Brand: MAJORITY Pages: 24
Samyung ENC SH-220 Instruction Manual preview
SH-220
Brand: Samyung ENC Pages: 23
HanRongDa HRD-787 Operational Manuallines preview
HRD-787
Brand: HanRongDa Pages: 16
Cobra CIR 1000 A Instruction Manual preview
CIR 1000 A
Brand: Cobra Pages: 35
Pulsar PG7750BCO Operator'S Manual preview
PG7750BCO
Brand: Pulsar Pages: 26
Memorex MP4907 User Manual preview
MP4907
Brand: Memorex Pages: 2
Ulvac EMP-20W Instruction Manual preview
EMP-20W
Brand: Ulvac Pages: 50
Audiovox GMRS600SLK Owner'S Manual preview
GMRS600SLK
Brand: Audiovox Pages: 28
Fabco Power HYDRO 300X6 Instruction Manual preview
HYDRO 300X6
Brand: Fabco Power Pages: 13
Pulsar G465GN Operator'S Manual preview
G465GN
Brand: Pulsar Pages: 22
Craig CD6961BT Owner'S Manual preview
CD6961BT
Brand: Craig Pages: 2
Curtis DVD8007 Instruction Manual preview
DVD8007
Brand: Curtis Pages: 21
DeWalt ToughSystem 2.0 RADIO + CHARGER Instruction Manual preview
ToughSystem 2.0 RADIO + CHARGER
Brand: DeWalt Pages: 26
DeWalt DCR025 Instruction Manual preview
DCR025
Brand: DeWalt Pages: 36
DeWalt DCR019-XE Instruction Manual preview
DCR019-XE
Brand: DeWalt Pages: 12
DeWalt T STAK CONNECT DWST1-81079-GB Manual preview
T STAK CONNECT DWST1-81079-GB
Brand: DeWalt Pages: 146
DeWalt DWST1-75663 Manual preview
DWST1-75663
Brand: DeWalt Pages: 152
DeWalt DCR028 Instruction Manual preview
DCR028
Brand: DeWalt Pages: 38

Brands by name

Popular brands

Load more brands