Appendix 1. Program Error
566
Error No.
Details
Remedy
P124
No spec: Inverse time feed
There is no inverse time option.
• Check the specifications.
P125
G93 mode error
• A G code command that cannot be issued
was issued during G93 mode.
• G93 command was issued during a modal
for which inverse time feed cannot be
performed.
• Reconsider the program.
P126
Invalid cmnd in high-accuracy
An illegal command was issued during the
high-accuracy control mode.
• A G code group 13 command was issued
during the high-accuracy control mode.
• Milling, cylindrical interpolation or pole
coordinate interpolation was commanded
during the high-accuracy control mode.
• Reconsider the program.
P127
No spec: SSS Control
The SSS control valid parameter was set to
ON although there is no SSS control
specification.
• Check the specifications.
If there is no SSS control specification, set the
parameter #8090 SSS ON to 0.
P130
2nd M function code illegal
The 2nd miscellaneous function address
commanded in the program differs from the
address set in the parameters.
miscellaneous function.
• Check and correct the 2nd miscellaneous
function address in the program.
P131
No spec: Cnst surface ctrl G96
A constant surface speed control command
(G96) was issued even though there is no
specification.
• Check the specifications.
• Change the constant surface speed control
command (G96) to a rotation speed command
(G97).
P132
Spindle rotation speed S=0
No spindle rotation speed command has been
issued.
• Reconsider the program.
P133
Illegal P-No. G96
An invalid constant surface speed control axis
has been specified.
• Reconsider the parameter specified for the
constant surface speed control axis.
P140
No spec: Pos compen cmd
The position compensation command (G45
to G48) specifications are not available.
• Check the specifications.
P141
Pos compen during rotation
Position compensation was commanded
during the figure rotation or coordinate
rotation command.
• Reconsider the program.
P142
Pos compen invalid arc
A position compensation invalid arc
command was commanded.
• Reconsider the program.