Mitsubishi Electric GT14, User Manual

Page: 470 / 1546

23 - 20
23. ETHERNET CONNECTION
23.4 PLC Side Setting

[Module parameter] of GX Works3
(1) Built-in Ethernet port
(For MELSEC iQ-R Series)
: Necessary : As necessary : Not necessary

[Controller Setting] and [Ethernet] of GT
Designer3
POINT POINT POINT
(1) [Controller Setting] and [Ethernet] of GT
Designer3
For [Controller Setting] and [Ethernet] of GT
Designer3, refer to the following.
23.3.1 Setting communication interface
(Communication settings)
(2) Ethernet setting
When connecting Built-in Ethernet port CPU to a
GOT, the setting items for the network No. and
station No. do not exist at the PLC side. However,
these virtual values must be set on the GOT side.
Therefore, set the network No. and station No.
Set the network No. that does not exist on the
network system and any station No.
(1) Controller setting
(2) Ethernet setting
*1 Set the same value as that of GOT N/W No.
*2 Set a value different from that of the GOT PLC No. and the
PLC No. of other PLCs on the same network.
*3 In the case of MELSEC iQ-F series, it is FX5CPU.
*4 In the case of MELSEC iQ-F series, it is 5562 (fixed).
*5 In the case of MELSEC iQ-F series, it is TCP (fixed).
Item Set value
Setting
necessity at
GOT connection
IP Address 192.168.0.1
Subnet Mask -
Default Gateway -
Online Program Change
Permission/Protection Setting
(Use default value)
Communication Data Code
Open Method Setting
Target Device Connection
Configuration Setting
-
Item Set value (Use default value)
GOT NET No. 1
GOT PLC No. 1
GOT IP Address 192.168.0.18
GOT Port No. (Communication) 5001
GOT Port No.
(Ethernet Download)
5014
Default Gateway 0.0.0.0
Subnet Mask 255.255.255.0
Retry 3times
Startup Time 3sec
Timeout Time 3sec
Delay Time 0ms
Item
Set value
Ethernet setting
No.1
Host * -
N/W No.
1
*1
1
*1
PLC No.
2
*2
3
*2
Type
RCPU
*3
RCPU
*3
IP address 192.168.0.1 192.168.0.2
Port No.
5006 (fixed)
*4
5006 (fixed)
*4
Communication
UDP (fixed)
*5
UDP (fixed)
*5