Mitsubishi Electric GT14, User Manual

Page: 41 / 1546

A - 39
HOW TO READ THIS MANUAL

Symbols
Following symbols are used in this manual.
Since the above page was created for explanation purpose, it differs from the actual page.
2.
3.
4.
Click!
PLC Connection cable
Connector
conversion box
External cable
GOT
model
Total
distance
Number of
connectable
Model name
equipment
Model name
RS-422 connector
conversion Cable
Communic
ation type
Cable model
MELSEC-Q
- RS-232
GT11-C30R2-6P(3m) 6m
1 GOT for 1
computer
link module
FA-CNV2402CBL(0.2m)
FA-CNV2405CBL(0.5m)
RS-422
GT01-C30R4-25P(3m)
GT01-C100R4-25P(10m)
GT11H-C30-37P(3m)
GT11H-C60-37P(6m)
GT11H-C100-37P(10m)
13m
5.3 GOT Side Settings
5.3.1 Setting communicationinterface
(Communication settings)
Set the channel of the connected equipment.
1.
Select [Common] → [Controller Setting] from the menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Mitsubishi
• Controller Type: Set the option according to the
Controller Type to be connected.
• I/F: Interface to be used
• Driver: Set either of the following option according
to the Controller Type to be connected.
• BUS (Q)
• BUS (A/QnA)
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
5.3.2 Communication detail settings
Click the button when settings are completed.
5.3.2 Communication detail settings
(1) Bus (Q)
(2) Bus (A/QnA)
POINT POINT POINT
(1) Communication interface setting by Utility
The communication interface setting can be changed
on the Utility's [Communication Settings] after writing
[Communication Settings] of project data.
For details on the Utility, refer to the following manual.
GT

User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
(3) When changing Stage No. and Slot No.
Change these settings with the PLC CPU turned
OFF, and then reapply the power to the PLC CPU
and GOT.
Failure to do so may generate a system alarm
(No.487).
Item Description Range
1 to 7 (Default: 1) Number of stages
0 to 9
High/Normal/Low
(Default: 0)
(Default: Normal)
Slot No.
Monitor speed
1 to 7 (Default: 1) Number of stages
0 to 7 (Default: 0) Slot No.
Item Description Range
Indicates the location of related content.
Indicates the operation steps.
[ ] : Indicates the setting items displayed on
the software and GOT screen.
1. 2. 3.
…
Following GOT is shown.
Shows GT14 Handy.
Refers to the information required.
Refers to information useful
for operation.
POINT POINT POINT
HINT HINT HINT
GT11H-CNB-37S
OK