Mitsubishi Electric 800 Series, Instruction Manual, Page: 291 / 727

(D) Operation command and frequency command
290
PARAMETERS
5.9
(D) Operation command and frequency
command
Purpose Parameter to set
Refer to
page
To select the operation mode Operation mode selection P.D000 Pr.79 291
To start up in Network operation
mode at power-ON Communication startup
mode selection
P.D000, P.D001 Pr.79, Pr.340 300
To select the command source
during communication operation
Operation and speed
command sources during
communication operation,
command source selection
P.D010 to P.D013
Pr.338, Pr.339,
Pr.550, Pr.551
301
To prevent motor from rotating
reversely Reverse rotation prevention
selection
P.D020 Pr.78 308
To change the setting resolution
of speed
Set resolution switchover P.D030 Pr.811 345
To change the setting resolution
of the torque limit
Set resolution switchover P.D030 Pr.811 345
To set the frequency by pulse
train input
Pulse train input
P.D100, P.D101,
P.D110, P.D111 Pr.291,
Pr.384 to Pr.386
308
To perform JOG operation JOG operation P.D200, P.F002 Pr.15, Pr.16 312
To control frequency with
combinations of terminals
Multi-speed operation P.D300 to P.D315
Pr.28,
Pr.4 to Pr.6,
Pr.24 to Pr.27,
Pr.232 to Pr.239
314
To select torque command
method during torque control Torque command source
selection P.D120, P.D121,
P.D400 to P.D402 Pr.432, Pr.433,
Pr.804 to Pr.806
190