31
Digital Messages
composition can also be set to repeat by pressing the dual chevron button beside the Loop
Control menu.
More advanced methods of ordering audio files in a composition exist. Check the Advanced
option under Loop Control to enable it. With Advanced mode selected the Loop Control drop
down now has 4 loop levels that can be applied to audio clips in a nested loop format. The
Advanced mode also adds the Seq and Loop Base columns to the Composition window on the
right.
The inner most loop command is the highest loop level used in the composition. As audio clips
and loop commands are added to the composition they are given a sequence number in the
Seq column starting from 0. Loop commands are applied to audio clips above them starting
from the sequence number specified in the Loop Base column. Loop commands that are at an
outer level compared to the inner most used loop are applied to the entire composition above
that contains inner level loops. Loop levels and audio clips can be reorganized in the
composition window using the Up and Down buttons. They can be removed using the Del
button. Enter a name for the audio message in the Tag field and press OK to finalize the
composition, add it to the list of messages and to exit the menu. Refer to the figure below
where the entire composition is repeated once more.
Summary of Contents for Flex-Net Phase II
