66
Appendix B: Using the Configurator
Composition
Commands in the Composition list view can be added, deleted and moved up and down.
Select a WAV file in the Audio Clips pane and press the >> button to move it into the message.
It will initially have a count of 1. Edit the count to specify how many times the clip is to be
played. A value of 0 means repeat for ever. Repeat for ever should be used with care. If there
are following clips, they will never be played.
To repeat the entire sequence, insert a Repeat All command at the end of the list.
Commands in the Composition list view have the following columns.
Loop Control
In regular mode you specify the repeat count for a clip in its count field. You can use the >> key
to insert a Repeat All command. It must be the last command in the sequence.
Name
Description
Command
The command type. Either Audio Data (from the Audio Clips pane) or a
Loop Control command.
Count
The number of times the clip is to be repeated. A count of zero means loop
for ever.
Wave
The name of the wave file, as moved from the Audio Clips list.
Summary of Contents for Flex-Net Phase II
