![background image](http://html1.mh-extra.com/html/mircom/flex-net-phase-ii/flex-net-phase-ii_application-manual_1805867058.webp)
57
Appendix B: Using the Configurator
Panel Menu
The Panel Menu contains the following commands.
Delete Job
Version
Ctrl+D
This command permanently deletes the current Job / Job
Version from the database
Version
History
Display the Version History (Date, Author, Comments) for
the current job.
Compare Job
Versions
Compare two versions of the same job, or two similar jobs of
different lineage.
Convert Job
Convert a job between two models. Produces a new version
of the current job.
Validate Job
This action performs all of the steps normally performed
when preparing to send a job to the panel.
Edit Job
Toggle the lock on a job that is protected against
unintentional edits or has been down loaded to a panel.
Name
Short cut
Description
Connect
Ctrl+L
This command will establish a connection between the
configuration tool and the panel, enabling most of the other
commands in this menu. Remember to disconnect when you
are finished, as a trouble will be indicated on the fire alarm
panel as long as the laptop is connected.
Send Job
Ctrl+S
Build the job and send the configuration to the panel.
Get Job
Ctrl+G
Get the job from the panel and store it on the configuration
tool's database. The job becomes the current job, shown in
the user interface.
Panel
Information...
Displays detailed information about the panel to which the
configuration tool is connected.
Security Key
Information...
Displays information about the security key for those
products that support a key. The user must have entered the
correct PIN when prompted - either when configurator was
started or when the key was inserted - to enable this
command.
Upgrade
Firmware...
Loads firmware to the panel from a firmware archive file.
BDM
Upload...
Upgrade the firmware using the BDM interface. Only used
for upgrading Ver 7.XX to Ver 2.X.X FX2000 firmware.
Name
Short cut
Description
Summary of Contents for Flex-Net Phase II
