113
Appendix B: Using the Configurator
format will be used for all time reporting (reports, LCD display) for this
Annunciator.
•
Passcodes - this section only appears on the main display.
•
Level 1, 2 and 3 - specify the passcode for three levels of access. Passcodes
must be composed from the digits 0-3 only.
•
Access Levels - this section only appears on the main display.
•
Specify the level of access for various front panel actions. A 0 means that the
panel operator need not enter a pass code. A 1 means the operator must enter
the code specified for Level 1, in the Pass Codes section of the main display,
etc. An operator who has been given the Level 3 passcode automatically has
access to the actions assigned lower access levels, etc.
•
Node - this section only appears on Remote Annunciators.
•
Tag - enter a tag for the annunciator. The tag apears in the tree view.
•
Node Number - enter the node number (CPU) for the remonte annunciator. The
combo box lists the available addresses in the external CPU range.
Job Details
This form view appears in the top, right pane when the Job Details item is selected in the Job
Tree view.
Some items can be overridden at the Loop Controller (CPU) level. Those check boxes are tri-
state and are greyed if the choices made at the lower levels have been edited to be different
from the system wide values on this page. They can be forced back into agreement by editing
them here.
Summary of Contents for Flex-Net Phase II
