![background image](http://html1.mh-extra.com/html/mircom/flex-net-phase-ii/flex-net-phase-ii_application-manual_1805867101.webp)
100
Appendix B: Using the Configurator
The table describes all of the columns in the list view. Some advanced or system columns are
hidden by default.
Custom Messages
This feature allows a single message to be used for a group of circuits. This is used for
consolidating the annunciating of a group of circuits. In the example shown below the devices
in the Exhibits Hall would be annunciated individually on the Main Display, but on the East
Wing Exit LCD annunciator, the message Exhibits Hall will be displayed for any device that
activates.
In a Network, the local input ciruits must first be combined into input zones. It is then the zones
that are combined correlated to custom or group messages.
Name
Visible
Description
CktNo
Yes
Internal CKtNo or Index. This number does not start at zero
because there is a block of System Intervals that occupy the
lower range. The number appears in the DeviceID in the
equation symbol table.
Interval No
No
An internal, allocated number: the single interval range
associated with this interval.
Start Year
No
Not used for simple intervals.
Start Month
No
Not used for simple intervals.
Start Day
No
Not used for simple intervals.
Start Hour
Yes
The hour (0-23) when the interval period is to start.
Start Min
Yes
The minute (0-59) when the interval period is to start.
Start DoW
No
Not used for simple intervals.
End Year
No
Not used for simple intervals.
End Month
No
Not used for simple intervals.
End Day
No
Not used for simple intervals.
End Hour
Yes
The hour (0-23) when the interval period is to end.
End Min
Yes
The minute (0-59) when the interval period is to end.
DoW
Yes
The day of the week if the interval period is restricted to one day.
Leave blank is the period is to occur every day.
Tag
Yes
A 20 character tag to identify the interval. This will appear in the
"Symbol Table" when composing equations that reference
intervals.
Summary of Contents for Flex-Net Phase II
